Carburetor - Inspect/Recondition
注: 请参阅维修手册, "拆解和组装"模块以了解有关这些主题的信息：拆卸, 拆解, 组装 和 安装。
- 拆解空燃混合器。
- 检查膜片 (1) 。 如果膜片磨损或损坏，更换膜片。
Show/hide table
 | |
| 图 1 | g00788856 |
- 检查活塞 (2) 。 如果活塞过度磨损，更换空燃混合器体和膜片组件。
- 检查油门轴 (3) 轴承附近有无磨损。 检查油门板 (4) 和油门体有无磨损和 / 或损坏。 更换所有磨损或损坏的部件。
- 组装空燃混合器。 组装时使用新密封垫。
- 安装空燃混合器。
- 请按照专门说明书, REHS0371, "G3300 和 G 3400 发动机的安装和初始起动步骤"调整空燃混合器。
Caterpillar Information System:
3304B and 3306B Engines for Caterpillar Built Machines Exhaust Manifold - Remove and Install
G3408 and G3412 Engines Camshaft
G3300 Engines Belts - Replace
G3300 Engines Batteries - Replace
3412E and C30 Marine Engines Zinc Rods - Inspect/Replace
3126B Marine Engine Boost Pressure Sensor
3412E, C30 and C32 Marine Engines Aftercooler - Install
G3300 Engines Battery Charger - Check
G3300 Engines Automatic Start/Stop - Inspect - Generator Set
3412E and C30 Engines Air Starting Motor Pressure Regulating Valve
3606 and 3608 Engines Engine Oil Cooler
3408C, 3412C and 3412D High Performance Marine Engines Air Starting Motor
Digital Voltage Regulator Customer Options
3412E and C30 Engines Heat Exchanger
Digital Voltage Regulator Dimensions
Digital Voltage Regulator Display and Keypad
Digital Voltage Regulator Electrical
Digital Voltage Regulator Fault Classifications
Digital Voltage Regulator Fault Codes
Digital Voltage Regulator Fault Handling for Earlier Digital Voltage Regulators
Digital Voltage Regulator Fault Handling
Digital Voltage Regulator General Information
Digital Voltage Regulator General Information
Digital Voltage Regulator Loading and Stopping Profile