Cutter
Show/hide table
Illustration 1 | g00485511 |
(1) Close the jaws and measure the gap between the cutters. ... 0.2 to 0.5 mm (0.008 to 0.02 inch)
Tighten the cutter bolts to the following torque.
- P16, P20, P25, P28 ... 270 ± 40 N·m (200 ± 30 lb ft)
- P40 and P60 ... 530 ± 70 N·m (390 ± 52 lb ft)
Caterpillar Information System:
Gas Engine Driven Chiller Driveline Walk-Around Inspection
3306B Industrial Engine Start Switch
Gas Engine Driven Chiller Driveline Pneumatic Drum Clutch Air Control Components - Inspect
3406E Truck Engines BrakeSaver
3304B and 3306B Engines for Caterpillar Built Machines Cylinder Head - Remove
3408E and 3412E Engines for Caterpillar Built Machines Valve Rocker Arms, Lifters, and Bridges
Gas Engine Driven Chiller Driveline Pneumatic Drum Clutch - Lubricate
3406C (PEEC III) Truck Engine Connecting Rod
3304B and 3306B Engines for Caterpillar Built Machines Crankshaft Main Bearings - Install
3408E and 3412E Engines for Caterpillar Built Machines Cylinder Liner - Remove
3304B and 3306B Engines for Caterpillar Built Machines Crankshaft Main Bearings - Remove
3304B and 3306B Engines for Caterpillar Built Machines Crankshaft Front Seal - Remove
P16, P20, P25, P28, P40 and P60 Pulverizers Pulverizer Troubleshooting
3176C and 3196 Industrial Engines Fan Drive
3306B Industrial Engine Radiator
3406C Engines for Caterpillar Built Machines Accessory Drive
3408E and 3412E Industrial Engines Unit Injector
3306B Industrial Engine Water Temperature Indicator
3408E and 3412E Engines for Caterpillar Built Machines Unit Injector Wiring
3306B Industrial Engine Engine Oil Pressure Indicator
3306B Industrial Engine Engine Oil Pressure Indicator
3306B Industrial Engine Engine Oil Pressure Indicator
3306B Industrial Engine Water Temperature Indicator
3412E and C30 Engines Cylinder Block