PRODUCT SUPPORT PROGRAM FOR REPLACING BUCKET ADAPTER ON CERTAIN 336D AND 336D L EXCAVATORS
Usage:
REBE8593-00
Show/hide table
| 23Jul2012 |
D-337
O-356
Show/hide table
| After Failure Only | PRODUCT SUPPORT PROGRAM FOR REPLACING BUCKET ADAPTER ON CERTAIN 336D AND 336D L EXCAVATORS |
|
| 6513 6503 | PS52265 |
|
Show/hide table
| NOTE: | This Program can only be administered after a failure occurs. The decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS52265" as the Part Number and "7755" as the Group Number. Use "96" as the Warranty Claim Description Code and use "Z" as the SIMS Description Code. |
Show/hide table
Show/hide table
| NOTE: | The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
Show/hide table
Show/hide table
Show/hide table
TERMINATION DATE |
| 31Jul2014 |
PROBLEM
Show/hide table
| The bucket adapter may break on certain 336D and 336D L Excavators. Generally, the adapter breaks at the pin hole area or the cutting edge area. There are no weld cracks related with this failure mode. |
AFFECTED PRODUCT
Show/hide table
| Model | Identification Number |
| 336D | JBT02716-02723, 2725, 2729-2730, 2732-2736, 2742, 2744, 2746, 2752, 2754, 2756, 2759-2760, 2762, 2766, 2770, 2776, 2778-2782, 2784-2786, 2790, 2797, 2799-2806, 2808-2809, 2812, 2814-2816, 2818-2820, 2822, 2825-2837, 2839, 2842-2844, 2846-2847, 2849-2852, 2854-2856, 2862, 2864, 2870, 2872-2873, 2877-2878, 2880-2881, 2883-2886, 2889-2892, 2894, 2898, 2902-2905, 2907, 2909, 2911, 2913, 2915, 2917, 2919, 2921, 2923, 2925, 2927, 2930, 2932-2934, 2936-2940, 2942, 2944-2948, 2950-2952, 2954-2980, 2982-2983, 2985-2994, 2996-3003, 3006-3021, 3023-3052, 3055-3096, 3098, 3100-3101, 3108-3113, 3116-3155, 3157-3192, 3195-3228, 3230-3306, 3310-3318, 3321-3339, 3341-3455, 3458-3655, 3657, 3659, 3661, 3663, 3665, 3667, 3669, 3671, 3673, 3675, 3689, 3691, 3693, 3695, 3697, 3699, 3701, 3703, 3705, 3707, 3709, 3711, 3713, 3715, 3717, 3719, 3721, 3723, 3725-3763, 3776-3798 |
| 336D L | MPL00459, 461, 464, 468-477, 479-512 |
PARTS NEEDED
Show/hide table
Qty |
Part Number | Description |
| 1 | 1590464 | ADAPTER-TWO STRP |
| 1 | 1590465 | ADAPTER-TWO STRP |
| 1 | 1590466 | ADAPTER-TWO STRP |
| In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 2% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer. | ||
ACTION REQUIRED
Show/hide table
| Refer to REHS0597, Special Instruction, "Recommendations for Welding J-Series 2-Strap Bucket Adapters to Base Edges", for the Rework Procedure. |
Show/hide table
SERVICE CLAIM ALLOWANCES
Show/hide table
0-12 mo |
||||||
Show/hide table
| NOTE: This is a 4.0-hour job | ||||||
Show/hide table
PARTS DISPOSITION
Show/hide table
| Handle the parts in accordance with your Warranty Bulletin on warranty parts handling. |
Caterpillar Information System:
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN REMAN CYLINDER HEADS FROM DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN REMAN CYLINDER HEADS FROM DEALER PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR REWORKING THE SILENCER LINERS ON CERTAIN 329E MEDIUM HYDRAULIC EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REWORKING THE SILENCER LINERS ON CERTAIN 329E MEDIUM HYDRAULIC EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE FUEL FILTRATION SYSTEM ON CERTAIN 320D AND 323D EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REWORKING THE FUEL FILTRATION SYSTEM ON CERTAIN 320D AND 323D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A RETURN FILTER ON CERTAIN 320D EXCAVATORS EQUIPPED WITH A HAMMER PRODUCT SUPPORT PROGRAM FOR INSTALLING A RETURN FILTER ON CERTAIN 320D EXCAVATORS EQUIPPED WITH A HAMMER
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN 341-4176 AND 341-4827 TEMPERATURE SENSORS FROM DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN 341-4176 AND 341-4827 TEMPERATURE SENSORS FROM DEALER PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR REPLACING THE BOOM LOWERING CHECK VALVES ON CERTAIN 374D AND 390D EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE BOOM LOWERING CHECK VALVES ON CERTAIN 374D AND 390D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE NRS VENTURI ON CERTAIN 336E AND 568 EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE NRS VENTURI ON CERTAIN 336E AND 568 EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE FUEL FILTRATION SYSTEM ON CERTAIN 320D EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REWORKING THE FUEL FILTRATION SYSTEM ON CERTAIN 320D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE FUEL FILTRATION SYSTEM ON CERTAIN 320D EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REWORKING THE FUEL FILTRATION SYSTEM ON CERTAIN 320D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE LINES GROUP OF THE BUCKET CYLINDER ON CERTAIN 320D AND 323D EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REWORKING THE LINES GROUP OF THE BUCKET CYLINDER ON CERTAIN 320D AND 323D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HEUI PUMP ON CERTAIN 330D, 336D, AND 340D EXCAVATORS, 140M, AND 160M MOTOR GRADERS, D6R, AND D6T TRACK-TYPE TRACTORS, 2390, 2491, 511, 521, 522, 532, AND 552 TRACK FELLER BUNCHERS, 627G, 637D, 637E, AND 637G PRODUCT SUPPORT PROGRAM FOR REPLACING THE HEUI PUMP ON CERTAIN 330D, 336D, AND 340D EXCAVATORS, 140M, AND 160M MOTOR GRADERS, D6R, AND D6T TRACK-TYPE TRACTORS, 2390, 2491, 511, 521, 522, 532, AND 552 TRACK FELLER BUNCHERS, 627G, 637D, 637E, AND 637G
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 325-1410 AND 325-1412 WATER SEAL ASSEMBLIES ON CERTAIN 5130B EXCAVATORS,777C, 777D, 785, 785B, 789, 793, 793B, 793C, 793D AND 797B OFF-HIGHWAY TRUCKS, 854G, AND 854K WHEEL DOZERS, 992G, 994, 994D, AND 994F WH PRODUCT SUPPORT PROGRAM FOR REPLACING THE 325-1410 AND 325-1412 WATER SEAL ASSEMBLIES ON CERTAIN 5130B EXCAVATORS,777C, 777D, 785, 785B, 789, 793, 793B, 793C, 793D AND 797B OFF-HIGHWAY TRUCKS, 854G, AND 854K WHEEL DOZERS, 992G, 994, 994D, AND 994F WH
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND REWORKING, IF NECESSARY, THE UNDERCARRIAGE COVER ON CERTAIN 319D HYDRAULIC EXCAVATORS PRODUCT SUPPORT PROGRAM FOR INSPECTING AND REWORKING, IF NECESSARY, THE UNDERCARRIAGE COVER ON CERTAIN 319D HYDRAULIC EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE BLADE CONTROL VALVE ON CERTAIN 303.5E AND 304E MINI HYDRAULIC EXCAVATORS PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE BLADE CONTROL VALVE ON CERTAIN 303.5E AND 304E MINI HYDRAULIC EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE STABILIZER CYLINDER SUPPORT BRACKETS ON CERTAIN M325D L MH LARGE WHEELED MATERIAL HANDLERS PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE STABILIZER CYLINDER SUPPORT BRACKETS ON CERTAIN M325D L MH LARGE WHEELED MATERIAL HANDLERS
PRODUCT SUPPORT PROGRAM FOR REPAIRING THE SPROCKET BOLTS LOOSENING ON CERTAIN 365C, 374D, 365C AND 390D EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPAIRING THE SPROCKET BOLTS LOOSENING ON CERTAIN 365C, 374D, 365C AND 390D EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REPLACING CERTAIN COMPONENTS WITHIN THE MAIN CONTROL VALVE ON CERTAIN 349E L EXCAVATORS PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REPLACING CERTAIN COMPONENTS WITHIN THE MAIN CONTROL VALVE ON CERTAIN 349E L EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE CE PLATE ON CERTAIN 308E-CR MINI HYDRAULIC EXCAVATORS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE CE PLATE ON CERTAIN 308E-CR MINI HYDRAULIC EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE LIFTER SPRING GUIDES AND THE VALVE LIFTER ASSEMBLIES ON CERTAIN 336D EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE LIFTER SPRING GUIDES AND THE VALVE LIFTER ASSEMBLIES ON CERTAIN 336D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE BOOM GROUP ON CERTAIN 329D, 329DL, 336D, 336DL, AND 340DL EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE BOOM GROUP ON CERTAIN 329D, 329DL, 336D, 336DL, AND 340DL EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE LEAKING BOOM CYLINDER ASSEMBLY ON CERTAIN 385C FS HYDRAULIC EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE LEAKING BOOM CYLINDER ASSEMBLY ON CERTAIN 385C FS HYDRAULIC EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE MONITOR SOFTWARE GROUP ON CERTAIN M313D, M315D, M316D, M318D, M322D, M318D MH, AND M322D MH WHEELED EXCAVATORS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE MONITOR SOFTWARE GROUP ON CERTAIN M313D, M315D, M316D, M318D, M322D, M318D MH, AND M322D MH WHEELED EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CLEAN EMISSIONS MODULE (CEM) TEMPERATURE SENSOR ON CERTAIN 312E, 312E L, 316E L, 320E, 320E L, 320E LRR, 323E L, AND 323E LN EXCAVATORS, 924K, 930K, AND 938K WHEEL LOADERS, D3K 2 LGP, D3K 2 XL, D4K 2 LGP, D4K PRODUCT SUPPORT PROGRAM FOR REPLACING THE CLEAN EMISSIONS MODULE (CEM) TEMPERATURE SENSOR ON CERTAIN 312E, 312E L, 316E L, 320E, 320E L, 320E LRR, 323E L, AND 323E LN EXCAVATORS, 924K, 930K, AND 938K WHEEL LOADERS, D3K 2 LGP, D3K 2 XL, D4K 2 LGP, D4K
PRODUCT SUPPORT PROGRAM FOR REPLACING THE LIFTER SPRING GUIDES AND THE VALVE LIFTER ASSEMBLIES ON CERTAIN CATERPILLAR PRODUCTS PRODUCT SUPPORT PROGRAM FOR REPLACING THE LIFTER SPRING GUIDES AND THE VALVE LIFTER ASSEMBLIES ON CERTAIN CATERPILLAR PRODUCTS