Water Pump - Assemble
组装步骤
Show/hide table
所需工具     | |||
---|---|---|---|
工具     | 零件号     | 零件描述     | 数量     |
C     | 1P-0510     | 起子总成     | 1     |
D     | 138-9299     | 密封工具     | 1     |
E     | 139-0088     | 密封工具     | 1     |
F     | 4C-9500     | 快速硫化底漆     | 1     |
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 使用工具 (F) 清洁轴 (10) 和壳体 (4) 中油封 (5) 的沉头孔。
Show/hide table
图 1 | g01163722 |
- 使用工具 (C) 将新油封 (5) 安装到壳体 (4) 中。 安装密封时使密封金属表面上的零件号朝向壳体。 确保油封与壳体沉头孔的前边缘平齐。 请勿润滑油封。
- 将轴承内圈 (6) 安装到轴 (10) 上。
- 安置轴承挡圈 (8) ,"此侧朝外"标记朝向轴 (10) 的齿轮端。 安装齿轮 (15) 。 将垫圈 (12) 和螺栓 (13) 安装到轴 (10) 上。 将螺栓 (13) 拧紧到 215 ± 40 N·m (159 ± 30 lb ft) 的扭矩。
- 在轴 (10) 上滑动工具 (D) 。 锥边缘将朝向外侧。
- 将齿轮和轴组件安装到壳体 (4) 中。 小心不要损坏油封。 安装将轴承挡圈 (8) 固定在壳体上的螺栓 (14) 。
- 从轴 (10) 上拆下工具 (D) 。
- 使用工具 (E) 和适合的压力机,将新的密封件 (2) 安装到轴 (10) 上和壳体 (4) 中。 确保密封外侧壳体完全座入壳体中。
- 将叶轮 (3) 定位到轴 (10) 上。 安装垫圈 (9) 和螺栓 (11) 。 拧紧螺栓至扭矩为 39 ± 3 N·m (29 ± 2 lb ft)。
- 将新的 O 形密封圈安装到适配器 (1) 的外侧。 利用干净的机油轻轻润滑密封。
- 将新的 O 形密封圈 (7) 安装到适配器 (1) 上。
- 将适配器 (1) 安置到壳体 (4) 上。
- 将新的 O 形密封圈 (16) 安装到壳体 (4) 中。
End By: 安装水泵。 请参阅 拆解和组装, "水泵 - 安装"。
Caterpillar Information System:
3406E On-Highway Engine Water Pump - Disassemble
3406E On-Highway Engine Water Pump - Install
3406E On-Highway Engine Water Pump - Remove
3306C Engines for Caterpillar Built Machines Vibration Damper
G3304 and G3306 Engines Crankshaft Pulley
3600 Heavy Fuel Engines Daily Performance Log
3406E Truck Engine Troubleshooting
3406E Truck Engines Turbocharger
3412E and C30 Engines Aftercooler
3306B Industrial Engine Piston and Rings
3408C, 3412C and 3412D High Performance Marine Engines Vibration Damper and Pulley
3406E On-Highway Engine Turbocharger - Install
Gas Engine Driven Chiller Driveline Operating Parameters
Gas Engine Driven Chiller Driveline Reference Numbers
3176C and 3196 Engines for Caterpillar Built Machines Electronic Control System Components
3304B and 3306B Engines for Caterpillar Built Machines Engine Oil Filter Base - Remove
C-10 and C-12 Truck Engines Air Inlet and Exhaust System
3608 Engine Engine Storage
Gas Engine Driven Chiller Driveline Package Lifting and Storage
Gas Engine Driven Chiller Driveline Torsional Coupling - Check
3306B Industrial Engine Flywheel
Gas Engine Driven Chiller Driveline Torsional Coupling - Disassemble/Clean/Inspect
Gas Engine Driven Chiller Driveline Torsional Coupling - Inspect
Gas Engine Driven Chiller Driveline Torsional Coupling Spring Packs - Replace