Water Pump - Install
Installation Procedure (Type 1)
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Note: Check the condition of the gaskets and the O-ring seals. If the gaskets or the O-ring seals are worn or damaged, use new parts for replacement.
- Install O-ring seal (6) on the water pump.
Show/hide table
Illustration 2 g00569688 - Position the water pump and install bolts (5).
Show/hide table
Illustration 3 g00569536 - Install the O-ring seal between cover (4) and the water pump. Install cover (4) and bolts (3).
- Install the O-ring seal and the gasket on elbow assembly (2). Lubricate the bore for the O-ring seal lightly with glycerin.
- Install elbow assembly (2) and bolts (1).
Show/hide table
Illustration 1 | g00499380 |
End By:
- Install the engine oil cooler. Refer to Disassembly and Assembly, "Engine Oil Cooler - Install".
Installation Procedure (Type 2)
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Note: Check the condition of the gaskets and the O-ring seals. If the gaskets or the O-ring seals are worn or damaged, use new parts for replacement.
- Install O-ring seal (6) on the water pump.
Show/hide table
Illustration 5 g01040996 - Position the water pump and install bolts (11).
Show/hide table
Illustration 6 g01040993 - Install the O-ring seal between water pump cover (8) and water pump (10).
- Install water pump cover (8) and bolts (9).
- Tighten hose clamp (7).
- Install the alternator bracket and the alternator, if these items were previously removed.
Show/hide table
Illustration 4 | g00499380 |
End By:
- Install the engine oil cooler. Refer to Disassembly and Assembly, "Engine Oil Cooler - Install".
Caterpillar Information System:
3406E On-Highway Engine Water Pump - Remove
3306C Engines for Caterpillar Built Machines Vibration Damper
G3304 and G3306 Engines Crankshaft Pulley
3600 Heavy Fuel Engines Daily Performance Log
3406E Truck Engine Troubleshooting
3406E Truck Engines Turbocharger
3412E and C30 Engines Aftercooler
3306B Industrial Engine Piston and Rings
3408C, 3412C and 3412D High Performance Marine Engines Vibration Damper and Pulley
3406E On-Highway Engine Turbocharger - Install
3406E and 3456 Engines for Caterpillar Built Machines Exhaust Manifold - Remove and Install
784C and 785C Off-Highway Truck/Tractors Air System and Brakes Solenoid Valve (Air Horn)
3406E On-Highway Engine Water Pump - Disassemble
3406E On-Highway Engine Water Pump - Assemble
Gas Engine Driven Chiller Driveline Operating Parameters
Gas Engine Driven Chiller Driveline Reference Numbers
3176C and 3196 Engines for Caterpillar Built Machines Electronic Control System Components
3304B and 3306B Engines for Caterpillar Built Machines Engine Oil Filter Base - Remove
C-10 and C-12 Truck Engines Air Inlet and Exhaust System
3608 Engine Engine Storage
Gas Engine Driven Chiller Driveline Package Lifting and Storage
Gas Engine Driven Chiller Driveline Torsional Coupling - Check
3306B Industrial Engine Flywheel
Gas Engine Driven Chiller Driveline Torsional Coupling - Disassemble/Clean/Inspect