New Front Suspension Mounting Hardware for 795F AC Off-Highway Trucks is Available {7200}
- Off-Highway Truck/Tractor
- 795F AC (S/N: ERM1-UP)
- 795FAC XQ (S/N: SNT1-UP)
New front suspension mounting hardware is now available for the machines listed above. The new mounting hardware does not require high torque tooling and provides a more consistent torque on the mounting hardware.
The mounting hardware can improve the service life of the front suspension mounting.
Show/hide table
Illustration 1 | g06329094 |
Front suspension mounting group |
Show/hide table
Required Parts | |||
---|---|---|---|
Item | Qty | Part Number | Part Name |
1 | 16 | Bolt | |
2 | 16 | Washer | |
3 | 16 | Nut | |
4 | 12 | Special Nut As | |
5 | 2 | Key | |
6 | 12 | Special Nut | |
7 | 12 | Bolt | |
8 | 12 | Washer | |
9 | 12 | Stud | |
10 | 12 | Special Nut |
Note: Referred suspension cylinder mounting hardware applies to the 795F AConly.
Caterpillar Information System:
980M Tier 4 and 982M Tier 4 Wheel Loaders Power Train Transmission Planetary - Assemble - Heavy Duty
S3015, S3025 and S3035 Demolition and Scrap Shears Work Tool Preparation for Troubleshooting
S3015, S3025 and S3035 Demolition and Scrap Shears Speed Control Valve
S3015, S3025 and S3035 Demolition and Scrap Shears Gerotor Motor
S3015, S3025 and S3035 Demolition and Scrap Shears Control Manifold - Crossover Relief Valve
S3015, S3025 and S3035 Demolition and Scrap Shears Swivel
S3015, S3025 and S3035 Demolition and Scrap Shears Hydraulic System
S3015, S3025 and S3035 Demolition and Scrap Shears General Information
Procedure for Web Server Administrator Password on Certain Releases of VIMS 3G Software {7490, 7601, 7610, 7620} Procedure for Web Server Administrator Password on Certain Releases of VIMS 3G Software {7490, 7601, 7610, 7620}
24 Motor Graders Engine Supplement Engine Oil Pump - Remove and Install
950M and 962M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Ride Control Accumulator
New VIMS 3G Software is Now Available for Certain Trucks {7490, 7601, 7610, 7620} New VIMS 3G Software is Now Available for Certain Trucks {7490, 7601, 7610, 7620}
24 Motor Grader Machine Systems Blade Lift Cylinder - Remove and Install
C175 Tier 4 Final Engines for Caterpillar Built Machines Crankcase Breather - Remove and Install
966M and 972M Wheel Loaders Fuel System Primary Filter (Water Separator) - Drain
24 Motor Grader Machine Systems Blade Tip Cylinder - Remove and Install
966M and 972M Wheel Loaders Fuel System Primary Filter (Water Separator) Element - Replace
966M and 972M Wheel Loaders Fuel System Secondary Filter - Replace
966M and 972M Wheel Loaders Engine Oil Level - Check
966M and 972M Wheel Loaders Engine Oil and Filter - Change
Guidelines for the Proper Usage of 2-Pass Aluminum Modular Radiators (AMR) on Certain Cat® Machines {1350, 1352, 1353, 1395} Guidelines for the Proper Usage of 2-Pass Aluminum Modular Radiators (AMR) on Certain Cat® Machines {1350, 1352, 1353, 1395}
980M and 982M Wheel Loaders Fuel System Primary Filter (Water Separator) - Drain
24 Motor Grader Machine Systems Bracket (Circle) - Remove and Install
980M and 982M Wheel Loaders Fuel System Primary Filter (Water Separator) Element - Replace