Air Cleaner - Remove and Install
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 439-3938 | Link Bracket | 2 |
Start By:
- Remove the ether starting aid.
- Loosen clamp (2) and clamp (3). Remove precleaner (1).
Show/hide table
Illustration 2 g06263508 - Loosen clamp (6). Remove bolts (5) and bracket assembly (4).
Show/hide table
Illustration 3 g06263509 - Attach Tooling (A) to panel assembly (8). The weight of panel assembly (8) is approximately
17 kg (37 lb) . Remove bolts (7) and panel assembly (8). - If necessary, reposition hose (9) out of the way.
Show/hide table
Illustration 4 g06263510 - Remove bolt (12) and cut cable straps (11). Disconnect harness assemblies (10) and position harness assemblies (10) out of the way.
Show/hide table
Illustration 5 g06263511 Show/hide tableIllustration 6 g06271834 - Use two people to remove panel assembly (15). The weight of panel assembly (15) is approximately
26 kg (57 lb) . Remove bolts (14) and panel assembly (15). - Open door (13). Remove bolts (16) and bracket assembly (17).
Show/hide table
Illustration 7 g06263513 - Loosen clamp (18). Disconnect hose (19) and position hose (19) out of the way.
Show/hide table
Illustration 8 g06263515 - Attach suitable lifting device to air cleaner (20). The weight of air cleaner (20) is approximately
38 kg (84 lb) . Remove bolts (21) and air cleaner (20).Show/hide tableIllustration 9 g06263637 - Remove bolts (23) and bracket assembly (22).
Show/hide table
Illustration 1 | g06263507 |
- Install the air cleaner in the reverse order of removal.
- Tighten bolts (23) to a torque of
15 ± 3 N·m (133 ± 27 lb in) . - Tighten clamp (3) to a torque of
4.5 N·m (39.8 lb in) .
- Tighten bolts (23) to a torque of
Caterpillar Information System:
New Fuel Additive is Now Used on Machines Produced at Piracicaba Facility {1250, 1280} New Fuel Additive is Now Used on Machines Produced at Piracicaba Facility {1250, 1280}
PM620, PM622, PM820, PM822 and PM825 Cold Planer Machine System Pump Control
785G Off-Highway Truck Power Train Oil Filter and Base (Rear Axle Lubrication) - Remove and Install
New Software Version Is Now Used on Certain Telehandlers {7610, 7620} New Software Version Is Now Used on Certain Telehandlers {7610, 7620}
The Valve Compensator Could Fail on Certain E, F, and F2 Series Backhoe Loaders. {5051} The Valve Compensator Could Fail on Certain E, F, and F2 Series Backhoe Loaders. {5051}
New Hardware for the Position Sensor and Mounting Group Is Now Used on Certain 259D Compact Track Loaders, 257D Multi-Terrain Loaders, and 242D Skid Steer Loaders {1408, 4806, 5736, 7400} New Hardware for the Position Sensor and Mounting Group Is Now Used on Certain 259D Compact Track Loaders, 257D Multi-Terrain Loaders, and 242D Skid Steer Loaders {1408, 4806, 5736, 7400}
785G Off-Highway Truck Power Train Oil Filter and Base (Rear Axle Lubrication) - Assemble
Cat ® Command for Dozing, Gen 3.5 Remote Control Operator Console with RFID for D7R II Track Type Tractor Maintenance Interval Schedule
An Improved Pinion Shaft on the Bevel Gear Group of the Rear Axle is Now used on Certain 424B Backhoe Loaders {3256, 3258, 3260, 4251} An Improved Pinion Shaft on the Bevel Gear Group of the Rear Axle is Now used on Certain 424B Backhoe Loaders {3256, 3258, 3260, 4251}
Regulatory Compliance Information Wireless Device - Pipelayer LMI 4 System- If Equipped
986K Wheel Loader Systems Manifold Group - Load Sense
PM620, PM622, PM820, PM822 and PM825 Cold Planer Machine System Hydraulic Schematic (Hydraulic Fan)
Improved Start Switch Assembly is Now Used on Certain Cat® Products {1416} Improved Start Switch Assembly is Now Used on Certain Cat® Products {1416}
725 and 730 Articulated Trucks Machine Systems Front Suspension Cylinder - Remove and Install
CB1.7 and CB1.8 Utility Compactors Operation
994K Wheel Loader Braking System - Test
Improved Transmission Intermediate Speed Sensor Is Now Used on Certain 700 Series Articulated Trucks {1408, 1439, 3030, 3073, 3167, 3175} Improved Transmission Intermediate Speed Sensor Is Now Used on Certain 700 Series Articulated Trucks {1408, 1439, 3030, 3073, 3167, 3175}
785G Off-Highway Truck Power Train Oil Filter and Base (Torque Converter) - Remove and Install
New Procedures for Retrofitting Lift Arms Are Now Available for SSL/MTL/CTL Machines {7054} New Procedures for Retrofitting Lift Arms Are Now Available for SSL/MTL/CTL Machines {7054}
3516E Engine for Tier 4 Final 994K Wheel Loaders Diagnostic Trouble Codes
3516E Engine for Tier 4 Final 994K Wheel Loaders Event Codes
Improved Steering Accumulator Hose Assemblies are Now Used on Certain 797 Off-Highway Trucks {4304, 4331} Improved Steering Accumulator Hose Assemblies are Now Used on Certain 797 Off-Highway Trucks {4304, 4331}
Brake Group Part Compatibility Check for Certain Off-Highway Trucks {4267, 7251} Brake Group Part Compatibility Check for Certain Off-Highway Trucks {4267, 7251}
CB7, CB8 and CB10 Vibratory Asphalt Compactors Machine Systems Canopy