AP555F Asphalt Paver Machine Systems Caterpillar


Hopper

Usage:

AP555F M45


Illustration 1g06186847

Table 1
Specification for 507-1842 Hopper 
Item  Qty  Part  Specification Description 
185-4025 Shim  As required, use the following shim in order to maintain a maximum gap of 6.0 mm (0.24 inch) between the front wing and the hoppers.
Thickness is 1.52 mm (0.059 inch)
8T-4167 Hard Washer  As required, use the following shim in order to maintain a maximum gap of 6.0 mm (0.24 inch) between the front wing and the hoppers.
Thickness is 4.0 mm (0.16 inch)
451-4638 Pin As  Before assembly, apply Loctite C5A Copper Anti-Seize to the full length of the pin diameter. 
423-0245 Plate  As required, use the following plate in order to ensure that the front of the hopper rests on the front frame.
Thickness is 3.0 mm (0.12 inch)
8T-2393 Bolt  Torque to 75 ± 5 N·m (55 ± 4 lb ft)

Caterpillar Information System:

AP655F and AP655F L Asphalt Paver Machine Systems Auger Extension
AP655F and AP655F L Asphalt Paver Machine Systems Auger Extension
AP655F and AP655F L Asphalt Paver Machine Systems Position Sensor (Sonic)
AP555F Asphalt Paver Machine Systems Tow Arm
AP655F and AP655F L Asphalt Paver Machine Systems Auger Extension - 750 mm (29.5 inch)
R1700 Load Haul Dump Engine Overspeed Control
3516E Engines for Caterpillar Built Machines Rocker Shaft and Push Rods - Install
725C, 725C2, 730C and 730C2 Articulated Truck Systems Suspension Height (Front) - Check and Adjust
C175 Tier 4 Final Engines for Off-Highway Trucks Cylinder Block, Liners and Heads
Lift Arm Weld Crack on Certain 424B Backhoe Loaders {6118, 6119} Lift Arm Weld Crack on Certain 424B Backhoe Loaders {6118, 6119}
745 Articulated Truck Parking Brake Manual Release
785G Off-Highway Truck Systems Location of Components (Automatic Lubrication System)
SE50 VT Asphalt Screed Hydraulic Cylinder (Extender)
Cylinder Assembly for the Service Brake Control Group May Fail on Certain 424B and 424B HD Backhoe Loaders {4269} Cylinder Assembly for the Service Brake Control Group May Fail on Certain 424B and 424B HD Backhoe Loaders {4269}
Universal Joint for the Hydraulic Hand Control Group May Fail on Certain 424B Backhoe Loaders {5063} Universal Joint for the Hydraulic Hand Control Group May Fail on Certain 424B Backhoe Loaders {5063}
Boot for the Hydraulic Hand Control Group May Fail on Certain 424B Backhoe Loaders {5063} Boot for the Hydraulic Hand Control Group May Fail on Certain 424B Backhoe Loaders {5063}
Meter Assembly for the Console Wiring Group May Malfunction on Certain 424B Backhoe Loaders {1408} Meter Assembly for the Console Wiring Group May Malfunction on Certain 424B Backhoe Loaders {1408}
Start Switch Assembly in the Console Wiring Group May Malfunction on Certain 424B Backhoe Loaders {1408} Start Switch Assembly in the Console Wiring Group May Malfunction on Certain 424B Backhoe Loaders {1408}
Solenoid Valve in the Transmission Hydraulic Control Group May Malfunction on Certain 424B Backhoe Loaders {3073, 3167} Solenoid Valve in the Transmission Hydraulic Control Group May Malfunction on Certain 424B Backhoe Loaders {3073, 3167}
Bushing Failures May Occur in the Boom on Certain 424B Backhoe Loaders {6501} Bushing Failures May Occur in the Boom on Certain 424B Backhoe Loaders {6501}
Hose Assembly May Leak Oil / Lube in the Hydraulic Oil Lines Group on Certain 424B Backhoe Loaders {5057} Hose Assembly May Leak Oil / Lube in the Hydraulic Oil Lines Group on Certain 424B Backhoe Loaders {5057}
745 & 740 GC Articulated Truck Brake Line Pressure for Front Axle - Test
745 & 740 GC Articulated Truck Brake Line Pressure for Center and Rear Axle - Test
740 Ejector Articulated Truck Frame and Body - Lubricate
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.