Final Drive, Steering Planetary, and Brake (Right Side) - Remove and Install
Show/hide table
Required Tools | |||
Tool | Part Number | Description | Qty |
A | 8T-3207 | Lifting Bracket | 1 |
5P-8622 | Shackle | 1 | |
1D-4615 | Bolt | 2 | |
1B-4331 | Nut | 2 | |
5P-8248 | Washer | 4 |
Start By:
- Separate the track.
- Remove the axles.
- Refer to Operation and Maintenance Manual, "Final Drive Oil - Change" for the correct draining and filling procedures.
Show/hide table
Illustration 1 g03862757 - Adjust the top bracket of Tooling (A) Install the lower plate of Tooling (A) without the spacers.
Show/hide table
Illustration 2 g03862759 - Remove two bolts (1) and install Tooling (A). Install a suitable lifting device to Tooling (A). The weight of the final drive, planetary assembly, and brake is approximately
794 kg (1750 lb) .Show/hide tableIllustration 3 g01125352 - Remove bolts (2) that hold the final drive, the planetary assembly, and the brake to the machine.
Note: Do not remove bolts (3) that hold the final drive, the planetary assembly, and the brake together.
- Remove bolts (4) that hold the planetary assembly and the brake to the machine.
Show/hide table
Illustration 4 g01125463 - Remove final drive (6). Remove planetary assembly and brake (7).
- Remove O-ring seals (5) and O-ring seal (8) from planetary assembly and brake (7).
- Install planetary assembly and brake (7) in the reverse order of removal.
- Tighten bolts (4) to a torque of
800 ± 90 N·m (590 ± 66 lb ft) . - Tighten bolts (1) to a torque of
300 ± 50 N·m (220 ± 37 lb ft) . Tighten bolts (1) for another 1/3 turn. The final torque for the bolt (1) must be a minimum of570 N·m (420 lb ft) .
- Tighten bolts (4) to a torque of
Caterpillar Information System:
2015/07/10 New and Improved Transmission Assembly Gear Shift Lever Is Now Used On Certain 424B Backhoe Loaders {3065, 3168}
Installing the 421-0265 Work Tool Kit {1408} Installing the 421-0265 Work Tool Kit {1408}
M318F, M320F and M322F Wheeled Excavators Machine System Specifications Radiator Enclosure
Installing the 421-0261 Work Tool Kit on Certain Compact Track Loaders and Skid Steer Loaders {1408} Installing the 421-0261 Work Tool Kit on Certain Compact Track Loaders and Skid Steer Loaders {1408}
CP44B and CS44B Vibratory Soil Compactors Machine Systems Eccentric Weight Housing - Remove
777E and 777F Off-Highway Truck Power Train Torque Converter Housing
MH3022, MH3024 and MH3026 Material Handlers Machine System Specifications Stick - 4.9 m (16.08 ft)
MH3022, MH3024 and MH3026 Material Handlers Machine System Specifications Boom Valve and Lines
2015/07/28 A New Plate Assembly for the Belt Guard Is Now Used on 730C and 730C EJECTOR Articulated Truck {1357, 7174}
MSS3s Machine Security System ECM Output Driver - Test
M318F, M320F and M322F Wheeled Excavators Machine System Specifications Boom Valve and Lines
MH3022, MH3024 and MH3026 Material Handlers Machine System Specifications Stick - 5.9 m (19.36 ft)
CCS7 Combination Vibratory Compactors Machine Systems Eccentric Weight Housing - Disassemble
CCS7 Combination Vibratory Compactors Machine Systems Eccentric Weight Housing - Assemble
C175-16 and C175-20 Engines for Off-Highway Trucks Engine Mount
2015/07/10 An Improved Alternator Mounting Group Is Now Used On Certain C15 And C18 Engines {1405}
MSS3s Machine Security System General Information
MSS3s Machine Security System Product Identification Number - Program
A Procedure to Install a Grease Adapter Guard on Certain 773E Off-Highway Trucks is Now Available {0372, 0374, 1000, 1003, 3101} A Procedure to Install a Grease Adapter Guard on Certain 773E Off-Highway Trucks is Now Available {0372, 0374, 1000, 1003, 3101}
MSS3s Machine Security System Key - Program
Pipelayer Counterweight Frame Concentric Pins (Inspect, Remove, Install, and Torque the Locking Ring Assembly){7052} Pipelayer Counterweight Frame Concentric Pins (Inspect, Remove, Install, and Torque the Locking Ring Assembly){7052}
AP500F Asphalt Paver Propel System Piston Pump Flow - Test
Bench Test Procedure for Hydraulic Piston Pumps {5070} Bench Test Procedure for Hydraulic Piston Pumps {5070}
MSS3s Machine Security System System Disarm - Program - Security System Bypass