Turbocharger - Remove and Install
Removal Procedure
Start By:
- Open hood and remove right side panel.
- Disconnect hoses (3) and remove flexible exhaust pipe (4) from turbocharger (1) .
Show/hide table
Illustration 1 | g03827855 |
- Remove banjo bolt (2), nut (6) and the tube. Remove bolts (7) and disconnect the tube.
- Remove nuts (5) and turbocharger (1) .
Installation Procedure
- Install turbocharger (1) in the reverse order of removal.
- Tighten nuts (5) to a torque of 28 N·m (248 lb in).
- Tighten bolts (7) to a torque of 10 N·m (89 lb in).
- Tighten banjo bolt (2) to a torque of 35 N·m (26 lb ft).
- Tighten nut (6) to a torque of 25 N·m (221 lb in).
Caterpillar Information System:
2015/05/01 An Improved Parking Brake Lever Is Now Available For All 914G, 924G, 928G, 930G,938G, IT914G, IT928G, and IT938G Compact And Small Wheel Loaders {4284}
Procedure to Install Parking Brake Lever That is Now Available For All 914G, 924G, 928G, 930G,938G, IT914G, IT928G, and IT938G Compact And Small Wheel Loaders{4284} Procedure to Install Parking Brake Lever That is Now Available For All 914G, 924G, 928G, 930G,938G, IT914G, IT928G, and IT938G Compact And Small Wheel Loaders{4284}
415F2 and 427F2 Backhoe Loaders Engine Supplement Air Cleaner - Remove and Install
422F2, 427F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Machine Systems Tilt Cylinder - Remove and Install - Single Tilt
Procedure To Install Cat® 416-2003 Grade and Slope Control Gp On Certain Series F Asphalt Pavers and Series V Asphalt Screeds {7219, 7220, 7620} Procedure To Install Cat® 416-2003 Grade and Slope Control Gp On Certain Series F Asphalt Pavers and Series V Asphalt Screeds {7219, 7220, 7620}
422F2, 427F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Machine Systems Tilt Cylinder - Remove and Install - Parallel Lift
PM310, PM312, and PM313 Cold Planer Water Spray System - Drain
C175-16 Engine for Off-Highway Truck/Tractors Fuel Injection Lines
2015/04/24 Improved Exhaust Tube Now Used on Track Feller Buncher Engine Hoods {7251}
415F2 Industrial Loader Before Operation
C175-16 Engine for Off-Highway Truck/Tractors Fuel Manifold (Rail)
C175-16 Engine for Off-Highway Truck/Tractors Fuel Manifold (Rail)
C175-16 Engine for Off-Highway Truck/Tractors Air Cleaner
16M Series 3 and 18M Series 3 Motor Grader Systems Articulation Cylinder and Mounting
2015/04/28 An Improved Speed Sensor Mounting Group Is Now Used on Certain 424B Backhoe Loaders {5736}
Field Installation Instructions for the 2-bolt to 3-bolt Fan Drive Upgrade on Certain 3500 Machines {1359, 7960} Field Installation Instructions for the 2-bolt to 3-bolt Fan Drive Upgrade on Certain 3500 Machines {1359, 7960}
CW34 Pneumatic Compactor Cooling System Coolant Sample (Level 1) - Obtain
CW34 Pneumatic Compactor Cooling System Coolant Sample (Level 1) - Obtain
CW34 Pneumatic Compactor Cooling System Water Temperature Regulator - Replace
CW34 Pneumatic Compactor Cooling System Water Temperature Regulator - Replace
Bench Test Procedure for 420F2, 426F2, 427F2, 428F2, 430F2, 432F2, 434F2, 440, 444F2, and 450 Backhoe Loader Transmissions {3030, 3073, 3139, 5051} Bench Test Procedure for 420F2, 426F2, 427F2, 428F2, 430F2, 432F2, 434F2, 440, 444F2, and 450 Backhoe Loader Transmissions {3030, 3073, 3139, 5051}
Procedure to Install Conveyor and Auger Sonic Sensors on AP255E, Paver {1408, 5657} Procedure to Install Conveyor and Auger Sonic Sensors on AP255E, Paver {1408, 5657}
2015/05/15 Sonic Sensor Kits Are Now Available on AP255E Asphalt Paver for the Conveyor and Auger {1408, 5657}
Improved Axles Are Available for Certain Vibratory Utility Compactors {7113} Improved Axles Are Available for Certain Vibratory Utility Compactors {7113}