Battery - Remove and Install
Removal Procedure
- Open the engine enclosure.
- Open the left engine access door. Turn the battery disconnect switch to the OFF position.
- Disconnect negative cable assemblies (1) from batteries (3) .
Show/hide table
Illustration 1 | g03726015 |
- Disconnect positive cable assemblies (2) from batteries (3) .
- Remove three nuts (5) and bracket (4) .
Installation Procedure
- Install batteries (3) in the reverse order of removal.
- Tighten nuts (5) to a torque of 8 ± 1 N·m (70.8 ± 8.9 lb in).
- Tighten positive cable assemblies (2) and negative cable assemblies (1) to a torque of 7.2 ± 1.6 N·m (63.73 ± 14.16 lb in).
Caterpillar Information System:
CW34 Pneumatic Compactor Engine Supplement Alternator Belt - Remove and Install
C7.1 Industrial Engine DEF Filler Screen - Clean
CW34 Pneumatic Compactor Engine Supplement Air Cleaner - Remove and Install
950M and 962M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Selector and Pressure Control Valve (Secondary Steering)
950M and 962M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Engine and Transmission Mounting
950M and 962M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Steering Control Valve
950M and 962M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Air Cleaner
950M and 962M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Air Cleaner - Mounting
950M and 962M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Position Sensor (Steering)
950M and 962M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Air Conditioner Lines
950M and 962M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Torque Converter Cooler Lines
950M and 962M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Brake and Planetary
CW34 Pneumatic Compactor Engine Supplement Electric Starting Motor - Remove and Install
CW34 Pneumatic Compactor Engine Supplement Engine - Remove and Install
CW34 Pneumatic Compactor Engine Supplement Engine Enclosure (Hood) - Remove and Install
CW34 Pneumatic Compactor Engine Supplement Expansion Tank - Remove and Install
CW34 Pneumatic Compactor Engine Supplement Fuel Filter (Secondary) and Fuel Filter Base - Remove and Install
CW34 Pneumatic Compactor Engine Supplement Gear Motor (Hydraulic Fan) - Remove and Install
CW34 Pneumatic Compactor Engine Supplement Manifold Valve (Bypass) - Remove and Install
CW34 Pneumatic Compactor Engine Supplement Muffler - Remove and Install
CW34 Pneumatic Compactor Engine Supplement Primary Fuel Filter, Water Separator and Base - Remove and Install
CW34 Pneumatic Compactor Engine Supplement Radiator, Hydraulic Oil Cooler, Air Cooler, and Fuel Cooler - Remove and Install
CW34 Pneumatic Compactor Engine Supplement Refrigerant Compressor - Remove and Install
950M and 962M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Steering Control Support