System Schematic
The following system schematics are correct, but do not show all details.
Reference: The machine Electrical Schematics
VIMSTM 3G Main ECM With or Without PL523
The schematics in Figure 1 and Figure 2 are for the VIMSTM 3G Main ECM With or Without PL523 on the following models:
- 834K (S/N: HRC)
- 834K (S/N: LRC)
- 836K (S/N: HRC)
- 836K (S/N: LRC)
- 988 (S/N: HRC)
- 988 (S/N: LRC)
Note: For machines without PL523, the connections are the same, minus the PL523 connections.
Show/hide table
| |
| Illustration 1 | g03669516 |
|
VIMSTM 3G Main ECM with/without Product Link® 523 | |
Show/hide table
| |
| Illustration 2 | g03672523 |
|
Data link connections | |
The schematics in Figure 3 and Figure 4 are for the VIMSTM 3G Main ECM on the following models:
- 950M
- 962M
- 966M
- 966M Series XE
- 972M
- 972M Series XE
- 980M
- 982M
Show/hide table
| |
| Illustration 3 | g03671467 |
|
VIMSTM 3G Main ECM | |
Show/hide table
| |
| Illustration 4 | g03672446 |
|
Data link connections | |
Caterpillar Information System:
586C LRC Site Prep Tractor Seat Belt - 4-Point Harness
C15 and C18 Engines for Caterpillar Built Machines Electronic Unit Injector
986K Wheel Loader Systems Circuit Breakers
980M and 982M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Control Manifold (Brake, Pilot, Fan)
C7 Engine for Caterpillar Built Machine Fan Drive - Disassemble
Backhoe Loaders Fitted with 2-Way Auxiliary Hydraulic Systems May Have Handle and Gate Mounted Incorrectly{5051} Backhoe Loaders Fitted with 2-Way Auxiliary Hydraulic Systems May Have Handle and Gate Mounted Incorrectly{5051}
Rework Procedure to Replace the Idler Assembly on Certain PM-200 Cold Planer{4159, 5604} Rework Procedure to Replace the Idler Assembly on Certain PM-200 Cold Planer{4159, 5604}
586C Site Prep Tractor Machine Systems Lift Cylinder
Testing the Diesel Particulate Filter (DPF) for Cracks, Leaks, and Recovery from Engine Oil Contamination for C6.6 and C4.4 Engines{108F} Testing the Diesel Particulate Filter (DPF) for Cracks, Leaks, and Recovery from Engine Oil Contamination for C6.6 and C4.4 Engines{108F}
914G2 and IT14G2 Compact Wheel Loaders Engine Crankcase Breather - Clean
980M and 982M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Engine Compartment Shield
825K Soil Compactor Specifications
980M and 982M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Electrohydraulic Control
824K Wheel Dozer Specifications
735C, 740C EJECTOR and 745C Articulated Trucks Connector Contact Description
950M, 962M, 950M Z and 962M Z Wheel Loaders Loader Frame to Rear Frame - Connect
980M and 982M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Oil Coolers and Cooling System Operation
730C2 and 725C2 Articulated Truck Power Train Transmission and Torque Converter Oil Filter - Remove and Install
Landfill Compactors, Soil Compactors, Wheel Dozers, and Wheel Loaders VIMSTM 3G General Information
Cat® Command For Hauling General Information
Landfill Compactors, Soil Compactors, Wheel Dozers, and Wheel Loaders VIMSTM 3G Features
Cat® Command For Hauling Control System
Landfill Compactors, Soil Compactors, Wheel Dozers, and Wheel Loaders VIMSTM 3G Electronic Control Module
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Brake Accumulator