Wiring (Heater) - Install
Parts and Specification Information
Show/hide table
Illustration 1 | g03496136 |
Parts are located in Crate 6.
Note: Verifying all parts are shipped and undamaged for preparation of assembly. Missing or damaged parts can be ordered prior to assembly to avoid delays during assembly.
Show/hide table
Item | Part Number | Part Description | Qty | Specification | Approximate Weight | |
424-2143 Wiring Group (Heater) | ||||||
1 | 432-4296 | Harness As | 1 | |||
2 | 127-9323 | Bracket As | 1 | |||
3 | 192-5017 | Bracket As | 1 | |||
4 | 204-8000 | Cable Tie Mounting | 14 | |||
5 | 8T-4121 | Hard Washers | 16 | |||
6 | 8T-4136 | Bolts
(M10X1.5X25-MM) |
16 | |||
7 | 204-2281 | Cable Straps | 14 | |||
8 | 5P-0562 | Lockwire
|
1 | |||
9 | 253-3559 | Film | 1 | |||
10 | 7X-6413 | Connector Plug As | 1 | |||
11 | 8T-0328 | Hard Washers | 4 | |||
12 | 7M-9910 | Screws
10-24X1-IN |
4 |
- Remove seven bolts (13), seven hard washers (14), and one plate assembly (15). Retain all hardware.
- Remove four screws (17), four washers (18), and one plate (16). Discard all hardware.
Show/hide table
Illustration 3 g03496138 (1) 432-4296 Harness As
(9) 253-3559 Film
(11) 8T-0328 Hard Washers
(12) 7M-9910 Screws (10-24X1-IN) - Install one harness assembly (1). Secure harness assembly (1) with four washers (11), and four screws (12).
- Install one film (9).
Show/hide table
Illustration 4 g03496140 (1) 432-4296 Harness As
(4) 204-8000 Cable Tie Mounting
(5) 8T-4121 Hard Washers
(6) 8T-4136 Bolts (M10X1.5X25-MM)
(7) 204-2281 Cable Straps - Route harness assembly (1). Secure harness assembly (1) with three cable tie mounts (4), three cable straps (7), three hard washers (5), and three bolts (6).
Show/hide table
Illustration 5 g03497038 (1) 432-4296 Harness As
(3) 192-5017 Bracket As
(4) 204-8000 Cable Tie Mounting
(5) 8T-4121 Hard Washers
(6) 8T-4136 Bolts (M10X1.5X25-MM)
(7) 204-2281 Cable Strap - Install one bracket assembly (3), one hard washer (5), and one bolt (6). Route harness assembly (1). Secure harness assembly (1) with one cable tie mount (4), one cable strap (7), one hard washer (5), and one bolt (6).
Show/hide table
Illustration 6 g03497039 (1) 432-4296 Harness As
(4) 204-8000 Cable Tie Mounting
(5) 8T-4121 Hard Washers
(6) 8T-4136 Bolts (M10X1.5X25-MM)
(7) 204-2281 Cable Straps - Route harness assembly (1). Secure harness assembly (1) with four cable tie mounts (4), four cable straps (7), four hard washers (5), and four bolts (6).
Show/hide table
Illustration 7 g03497041 (1) 432-4296 Harness As
(2) 127-9323 Bracket As
(4) 204-8000 Cable Tie Mounting
(5) 8T-4121 Hard Washers
(6) 8T-4136 Bolts (M10X1.5X25-MM)
(7) 204-2281 Cable Strap - Install one bracket assembly (2), one hard washer (5), and one bolt (6). Route harness assembly (1). Secure harness assembly (1) with one cable tie mount (4), one cable strap (7), one hard washer (5), and one bolt (6).
Show/hide table
Illustration 8 g03497043 (1) 432-4296 Harness As
(4) 204-8000 Cable Tie Mounting
(5) 8T-4121 Hard Washers
(6) 8T-4136 Bolts (M10X1.5X25-MM)
(7) 204-2281 Cable Straps - Route harness assembly (1). Secure harness assembly (1) with four cable tie mounts (4), four cable straps (7), four hard washers (5), and four bolts (6).
Show/hide table
Illustration 9 g03497045 (13) 8T-4183 Bolts (M12X1.75X40-MM)
(14) 8T-4223 Hard Washers
(15) 420-7862 Plate As - Install one plate assembly (15), seven hard washers (14), and seven bolts (13).
Show/hide table
Illustration 2 | g03496137 |
(13) 8T-4183 Bolts (M12X1.75X40-MM)
(14) 8T-4223 Hard Washers (15) 420-7862 Plate As (16) 432-4294 Plate (17) 7M-9910 Screws (10-24X1-IN) (18) 8T-0328 Hard Washers |
Caterpillar Information System:
994K Large Wheel Loader Field Assembly Manual Bumper - Install
994K Large Wheel Loader Field Assembly Manual Assembly Preparation
994K Large Wheel Loader Field Assembly Manual General Information - Torque Specifications, Graphic Color Description, and Graphic Symbol Description
994K Large Wheel Loader Field Assembly Manual Introduction
558 Forest Machine Machine Systems Pilot Valve (Swing Parking Brake)
2014/02/07 A New Air Lines Group Is Used on Certain Machine C175 High Altitude Arrangement Engines {1071}
The Final Drive Thrust Washers May Fail on Certain 14M Motor Graders{4050} The Final Drive Thrust Washers May Fail on Certain 14M Motor Graders{4050}
2014/05/20 An Improved Water Pump Seal Assembly Is Used on Certain Commercial Engines {1361, 7555}
2013/11/15 An Improved Centershift Lock Group Is Now Used on Certain K and K Series 2 Motor Graders {5221}
226 Skid Steer Loader TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565} 226 Skid Steer Loader TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565}
777G Off-Highway Truck Hydraulic and Braking System Operational Checks
2013/11/27 New Spindle for the Front Axle Group Is Used On Certain 16H and 16M Motor Graders {4205, 4313}
730C EJECTOR Articulated Truck Tire Shipping Pressure
793F Series AC Off-Highway Truck Engine Supplement Thermostatic Valve - Disassemble
793F Series AC Off-Highway Truck Engine Supplement Thermostatic Valve - Assemble
Comfort Series Seat For Caterpillar Machines General Information
770G and 772G Off-Highway Truck Systems Pump and Motor (Parking Brake Release, Secondary Steering)
725C, 725C2, 730C and 730C2 Articulated Truck Systems Electronic Control (Hydraulic System)
725C, 725C2, 730C and 730C2 Articulated Truck Systems General Information (Fan Hydraulic System)
988K XE Wheel Loader Machine Systems Steering Control Valve - Assemble
Connecting Link for the Chain Group Has Been Improved on Certain 16H and 16M Motor Graders{3261, 4063} Connecting Link for the Chain Group Has Been Improved on Certain 16H and 16M Motor Graders{3261, 4063}
C4.4 Industrial Engine Coolant Level - Check
C4.4 Industrial Engine Engine - Clean
C4.4 Industrial Engine Engine Air Cleaner Element (Dual Element/Canister Type) - Clean/Replace - If Equipped