773E and 777D Off-Highway Truck/Tractor Object Detection System (Two Cameras) Caterpillar

Show/hide table

Improper operation of an access platform could result in injury or death. Operators must carry out their duties properly and follow all instructions and guidelines given for the machine and access platform.

Show/hide table

Be sure all personnel are clear of the equipment while the equipment is being lowered. Failure to stay clear of the equipment while the equipment is being lowered may result in personal injury.

Inspecting the Cameras Views

1. Inspect the camera views from the display. The cameras were originally installed to capture one of the following views:

   1. Front
      • Partial view of the radiator grill

      • Partial view of the stairs

      • View of an object on the ground in front of the stairs

   2. Rear
      • Partial view of the rear of the dump body

      • Partial view of the rear frame

      • Partial view of the tires

      • View of an object on the ground 25 m (82 ft) behind the rear tires

2. If any of the cameras in the system do not capture the view as originally intended, the cameras will need to be adjusted. Consult you Cat dealer before adjustments are made to any of the cameras.

Note: When you access the cameras for inspection, be sure to observe safe procedures for access. Maintain a three-point contact and/or use a body harness.