Lifting and Tying Down the Machine
Show/hide table
| |
| Illustration 1 | g00788092 |
The weight and the instructions that are given herein describe the machine as the machine is manufactured by Caterpillar.
Refer to the Operation and Maintenance, "Specifications" for specific weight information.
- Use proper rated cables and slings for lifting. The crane should be positioned so that the machine is lifted parallel to the ground.
- To prevent contact with the machine, lifting cables should have sufficient length.
- Use the rear eyes and the front eyes that are provided on the lower frame to fasten tie-downs. Use corner protectors for sharp corners.
- Move the hydraulic lockout control to the LOCKED position.
Caterpillar Information System:
® for Dozing, Semi-Autonomous Tractor System (SATS) Camera - Clean
980M and 982M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Solenoid Valve (Ripper)
R3000H Load Haul Dump Crankshaft Vibration Damper - Inspect
R3000H Load Haul Dump Cooling System Water Temperature Regulator - Replace
R3000H Load Haul Dump Cooling System Pressure Cap - Clean/Replace
R3000H Load Haul Dump Cooling System Coolant Sample (Level 2) - Obtain
R3000H Load Haul Dump Cooling System Coolant Sample (Level 1) - Obtain
R3000H Load Haul Dump Cooling System Coolant (ELC) - Change
R3000H Load Haul Dump Cooling System Coolant Level - Check
R3000H Load Haul Dump Cooling System Coolant Extender (ELC) - Add
R3000H Load Haul Dump Collet Pin Bolt Torque - Check
R3000H Load Haul Dump Circuit Breakers - Reset
Cat® Command for Dozing, Remote Control Operator Station Monitor - Clean
® for Dozing, Semi-Autonomous Tractor System (SATS) Camera - Check
Cat® Command for Dozing, Remote Control Operator Station Ground Level Service Center - Check
2011/11/23 New High Temperature Paint is Available for the Truck Body on Certain Off-Highway Trucks {0652, 7250, 7559}
793F CMD Off-Highway Truck/Tractor Braking System Automatic Retarder Test
521B and 522B Track Feller Bunchers Machine Systems Swing Motor Case Drain Oil - Measure
C27 and C32 Engines for Caterpillar Built Machines Valve Mechanism Cover - Remove and Install
793F CMD Off-Highway Truck/Tractor Braking System Brake System Monitoring
259D, 279D, 289D, 299D, 299D XHP, 299D2 and 299D2 XHP Compact Track Loaders, 257D, 277D, 287D, 297D, 297D XHP, 297D2 and 297D2 XHP Multi Terrain Loaders and 236D, 242D, 246D, 262D, 272D, 272D XHP, 272D2 and 272D2 XHP Skid Steer Loaders Piston Pump (Hydrostatic)
Cat® Terrain Office Software Consumable Management
2011/11/11 New Mounting Bolts Update the Wheel Group on Certain 797 Off-Highway Trucks {4006, 4251, 7200}
793F CMD Off-Highway Truck/Tractor Braking System Electronic Control Module (ECM)