Flywheel
Usage:
Remove Flywheel
1. Install two 1/2" - 13NC forged eyebolts in the flywheel and attach a hoist.
2. Remove the flywheel retaining bolts. Remove the flywheel - weight 300 lbs. (136 kg).
Install Flywheel
1. Install two 1/2" - 13NC forged eyebolts in the flywheel.
2. Attach a hoist and position the flywheel on engine with hole in flywheel aligned with dowel pin in crankshaft.
3. Install the flywheel retaining bolts. Remove the hoist and eyebolts.
Caterpillar Information System:
D349 VEHICULAR ENGINE Air Compressor
D349 VEHICULAR ENGINE Cylinder Liners
D349 VEHICULAR ENGINE Pistons
D349 VEHICULAR ENGINE Spacer Plates
D349 VEHICULAR ENGINE Left Rear Cylinder Head Assembly
D349 VEHICULAR ENGINE Left Front Cylinder Head Assembly
D349 VEHICULAR ENGINE Right Rear Cylinder Head Assembly
D349 VEHICULAR ENGINE Right Front Cylinder Head Assembly
D349 VEHICULAR ENGINE Left Rear Camshaft Housing
D349 VEHICULAR ENGINE Left Front Camshaft Housing
D349 VEHICULAR ENGINE Right Rear Camshaft Housing
D349 VEHICULAR ENGINE Right Front Camshaft Housing
D349 VEHICULAR ENGINE Crankshaft Rear Seal
D349 VEHICULAR ENGINE Flywheel Housing
D349 VEHICULAR ENGINE Rear Timing Gears And Plate
D349 VEHICULAR ENGINE Crankshaft
5.4" BORE, 60 DEGREE V8 VEHICULAR ENGINE Systems Operation
5.4" BORE, 60 DEGREE V8 VEHICULAR ENGINE Testing And Adjusting
5.4" BORE, 60ø V8 VEHICULAR ENGINE Introduction
5.4" BORE, 60ø V8 VEHICULAR ENGINE Engine Design
5.4" BORE, 60ø V8 VEHICULAR ENGINE Fuel Injection Pump
5.4" BORE, 60ø V8 VEHICULAR ENGINE Governor (8S6420)
5.4" BORE, 60ø V8 VEHICULAR ENGINE Governor (1N7154)
5.4" BORE, 60ø V8 VEHICULAR ENGINE Governor (1N7998)