Air Compressor
Usage:
Remove Air Compressor
1. Drain the cooling system.
2. Disconnect all air, water and oil lines from the air compressor.
3. Attach a hoist to the air compressor. Remove the three retaining nuts. Remove the air compressor - weight 50 lbs. (23 kg).
Install Air Compressor
1. Attach a hoist and position the air compressor on the engine. Install the retaining nuts.
2. Connect all air, water and oil lines to the air compressor.
3. Fill the cooling system.
Caterpillar Information System:
D349 VEHICULAR ENGINE Cylinder Liners
D349 VEHICULAR ENGINE Pistons
D349 VEHICULAR ENGINE Spacer Plates
D349 VEHICULAR ENGINE Left Rear Cylinder Head Assembly
D349 VEHICULAR ENGINE Left Front Cylinder Head Assembly
D349 VEHICULAR ENGINE Right Rear Cylinder Head Assembly
D349 VEHICULAR ENGINE Right Front Cylinder Head Assembly
D349 VEHICULAR ENGINE Left Rear Camshaft Housing
D349 VEHICULAR ENGINE Left Front Camshaft Housing
D349 VEHICULAR ENGINE Right Rear Camshaft Housing
D349 VEHICULAR ENGINE Right Front Camshaft Housing
D349 VEHICULAR ENGINE Precombustion Chambers
D349 VEHICULAR ENGINE Flywheel
D349 VEHICULAR ENGINE Crankshaft Rear Seal
D349 VEHICULAR ENGINE Flywheel Housing
D349 VEHICULAR ENGINE Rear Timing Gears And Plate
D349 VEHICULAR ENGINE Crankshaft
5.4" BORE, 60 DEGREE V8 VEHICULAR ENGINE Systems Operation
5.4" BORE, 60 DEGREE V8 VEHICULAR ENGINE Testing And Adjusting
5.4" BORE, 60ø V8 VEHICULAR ENGINE Introduction
5.4" BORE, 60ø V8 VEHICULAR ENGINE Engine Design
5.4" BORE, 60ø V8 VEHICULAR ENGINE Fuel Injection Pump
5.4" BORE, 60ø V8 VEHICULAR ENGINE Governor (8S6420)
5.4" BORE, 60ø V8 VEHICULAR ENGINE Governor (1N7154)