Usage:
Recommended Procedure With Chassis Dynamometer
Possible Causes/Corrections
Minor Operating Faults
To help identify a problem before a more involved troubleshooting procedure is started, follow the procedure given in the "Primary Engine Checks" section.
Fuel Ratio Control Out Of Adjustment Or Defective
Follow the procedure in the Testing and Adjusting Section of this Service Manual.
Check Engine Performance
Do a Power Analysis Report (PAR), Level II, to check engine performance. Refer to LEBV2810 and SEHS7886 for the tooling and procedures to use. Be sure to make a record of the temperatures for inlet air, fuel (at filter base), lubricating oil and coolant. Make the necessary adjustments or repairs to the engine if needed.
At this point, the governor fuel settings should be verified. See the Testing and Adjusting Section of this Service Manual for the necessary procedures. Also, refer back to the information learned earlier (see "Owner/Operator Input" section) about the truck specifications and application and judge whether or not the engine is performing as expected or customer expectation is realistic.
Recommended Procedure Without Chassis Dynamometer
Possible Causes/Corrections
Minor Operating Faults
To help identify a problem before a more involved troubleshooting procedure is started, follow the procedure given in the "Primary Engine Checks" section.
Fuel Ratio Control Out Of Adjustment Or Defective
Follow the procedure in the Testing and Adjusting Section of this Service Manual.
Fuel Injection Timing Not Correct
Follow the procedures in the Testing and Adjusting Section of this Service Manual.
Check Engine Performance
Install the tooling and follow the procedure given in the Road Test section.
At this point, the governor fuel settings should be verified. See the Testing and Adjusting Section of this Service Manual for the necessary procedures. Also, refer back to the information learned earlier (see "Owner/Operator Input" section) about the truck specifications and application and judge whether or not the engine is performing as expected or customer expectation is realistic.