3408 & 3412 HIGH PERFORMANCE MARINE ENGINES Caterpillar


P-501 Electrical Power Supply To ECM

Usage:

System Operation

The ECM receives electrical power (battery voltage) through wiring supplied by the OEM manufacturer. In typical applications, the ECM receives power whenever the ignition key is turned on.

This procedure tests whether proper voltage is being supplied by OEM wiring.

For intermittent problems that could be caused by OEM wiring (such as intermittent shutdowns) temporarily bypassing the OEM wiring may be an effective means of determining the root cause. If symptoms vanish with the wiring bypassed, OEM wiring was the cause. A means of bypassing OEM wiring is explained in step 4 of the functional test.

NOTE: A back-up battery supply is recommended.

Schematic

Diagnostic Codes

Functional Test

Caterpillar Information System:

3408 & 3412 HIGH PERFORMANCE MARINE ENGINES P-500 Inspecting Electrical Connectors
3408 & 3412 HIGH PERFORMANCE MARINE ENGINES 5.0 Electronic Subsystem Functional Tests
3408 & 3412 HIGH PERFORMANCE MARINE ENGINES 4.0 Troubleshooting with a Diagnostic Code
3408 & 3412 HIGH PERFORMANCE MARINE ENGINES 3.0 Troubleshooting without a Diagnostic Code
3408 & 3412 HIGH PERFORMANCE MARINE ENGINES 2.0 Programming Parameters
3408 & 3412 HIGH PERFORMANCE MARINE ENGINES 1.0 Marine Electronic Control Module Overview
3408 & 3412 HIGH PERFORMANCE MARINE ENGINES Introduction
3408 ; 3412 High Performance Marine Engine Electrical System 3408 & 3412 High Performance Marine Engine Electrical System
3406C DIESEL TRUCK ENGINE Shutoff Solenoids
3406C DIESEL TRUCK ENGINE Starter Solenoids
3406C DIESEL TRUCK ENGINE Electric Starting Motors
3406C DIESEL TRUCK ENGINE Alternators And Regulators - 5N5692, 3T6353
3408 & 3412 HIGH PERFORMANCE MARINE ENGINES P-502 Throttle Position Sensor
3408 & 3412 HIGH PERFORMANCE MARINE ENGINES P-503 Synchronize Circuit
3408 & 3412 HIGH PERFORMANCE MARINE ENGINES P-504 Trolling Mode
3408 & 3412 HIGH PERFORMANCE MARINE ENGINES P-505 Low Engine Oil Pressure Warning
3408 & 3412 HIGH PERFORMANCE MARINE ENGINES P-506 ECM Diagnostic Lamp
3408 & 3412 HIGH PERFORMANCE MARINE ENGINES P-507 Transmission Oil Pressure/Temperature Warning
3408 & 3412 HIGH PERFORMANCE MARINE ENGINES P-508 Low Boost Pressure Warning
3408 & 3412 HIGH PERFORMANCE MARINE ENGINES P-509 Low Coolant Level Warning
3408 & 3412 HIGH PERFORMANCE MARINE ENGINES P-510 High Coolant Temperature Warning
3408 & 3412 HIGH PERFORMANCE MARINE ENGINES P-520 ECM/Personality Module
3408 & 3412 HIGH PERFORMANCE MARINE ENGINES P-521 Sensor Supply Voltage
3408 & 3412 HIGH PERFORMANCE MARINE ENGINES P-522 Main Engine Speed Sensor/Adjustment
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.