TROUBLESHOOTING 3406B (PEEC III) DIESEL TRUCK ENGINE OEM SYS Caterpillar


Introduction

Usage:

These testing procedures provide an inexpensive method to check the integrity of that part of the truck wiring system which is directly related to the 3406B (PEEC III) Engine using only a voltmeter and breakout "T"s (adapter cables).

There are two additional areas of 3406B (PEEC III)-related truck system responsibility which are not covered by these testing procedures. See the section entitled 3406B (PEEC III) Truck System Tests Not Covered by the Volt-Ohm Meter.

Reference: Electronic Troubleshooting, 3406B (PEEC III) Diesel Truck Engine, Form No. SENR5147; Electrical Schematic, 3406B (PEEC III) Diesel Truck Engine, Form No. SENR5152.

Caterpillar Information System:

3500 LOCOMOTIVE ENGINES PERSONALITY MODULE SETTINGS 3E6243 Personality Module High DB 4 Axle (Later)
3500 LOCOMOTIVE ENGINES PERSONALITY MODULE SETTINGS 3E6249 Personality Module Standard 4 Axle (Later)
3500 LOCOMOTIVE ENGINES PERSONALITY MODULE SETTINGS 3E1866 Personality Module High DB 4 Axle (Earlier)
3500 LOCOMOTIVE ENGINES PERSONALITY MODULE SETTINGS 3E0119 Personality Module Standard 4 Axle (Earlier)
3500 LOCOMOTIVE ENGINES PERSONALITY MODULE SETTINGS 3E1818 Personality Module Standard 4 Axle (No DB)
3500 LOCOMOTIVE ENGINES PERSONALITY MODULE SETTINGS 3E3411 Personality Module Standard 4 Axle (No DB)
3176C ENGINE FOR USE IN CPT372 & Section 7: Glossary of Terms
3176C ENGINE FOR USE IN CPT372 & Section 6: Sensor Calibrations
3176C ENGINE FOR USE IN CPT372 & Section 5: System Functional Tests
3176C ENGINE FOR USE IN CPT372 & Section 4: Troubleshooting With A Diagnostic Code
3176C ENGINE FOR USE IN CPT372 & Section 3: Troubleshooting Without A Diagnostic Code
3176C ENGINE FOR USE IN CPT372 & Section 2: Programming Parameters
TROUBLESHOOTING 3406B (PEEC III) DIESEL TRUCK ENGINE OEM SYS Tools Required
TROUBLESHOOTING 3406B (PEEC III) DIESEL TRUCK ENGINE OEM SYS Test Procedure
TROUBLESHOOTING 3406B (PEEC III) DIESEL TRUCK ENGINE OEM SYS 3406B (PEEC III) Truck System Tests Not Covered by the Volt-Ohm Meter
TROUBLESHOOTING 3406B (PEEC III) DIESEL TRUCK ENGINE OEM SYS Correct Adjustment of the Throttle Linkages
TROUBLESHOOTING 3406B (PEEC III) DIESEL TRUCK ENGINE OEM SYS Responsibility for Throttle Pedal Adjustment
TROUBLESHOOTING 3406B (PEEC III) DIESEL TRUCK ENGINE OEM SYS Visual Inspection and Repair of Connectors
TROUBLESHOOTING 3406B (PEEC III) DIESEL TRUCK ENGINE OEM SYS Correct Wiring of Vehicle Speed Sensor
TROUBLESHOOTING 3406B (PEEC III) DIESEL TRUCK ENGINE OEM SYS Location of 3406B (PEEC III) Truck System Connectors
TROUBLESHOOTING 3406B (PEEC III) DIESEL TRUCK ENGINE OEM SYS Operational Problem Chart
TROUBLESHOOTING 3406B (PEEC III) DIESEL TRUCK ENGINE OEM SYS P7 Connector Tests (Vehicle Connector)
TROUBLESHOOTING 3406B (PEEC III) DIESEL TRUCK ENGINE OEM SYS J11 Connector Tests (Throttle Position Sensor)
TROUBLESHOOTING 3406B (PEEC III) DIESEL TRUCK ENGINE OEM SYS J14 Connector Tests (Vehicle Speed Buffer)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.