Service Brake Control
Show/hide table
 | |
| Illustration 1 | g01703554 |
View of the brake system | |
(1) Apply white Loctite Low Breakloose PST to threads prior to assembly.
Show/hide table
 | |
| Illustration 2 | g01957880 |
Partial view of the right hand side of the machine | |
(2) Assemble in order to make dimension (B) . ... 530 ± 2 mm (20.9 ± 0.1 inch)
(3) Spring
- Assembled length ... 96.0 mm (3.78 inch)
- Load at assembled length ... 26.6 ± 2.6 N (5.98 ± 0.58 lb)
- Free length after test ... 84.0 mm (3.31 inch)
- Outside diameter ... 16.8 mm (0.66 inch)
- Load at assembled length ... 26.6 ± 2.6 N (5.98 ± 0.58 lb)
(4) Tighten the nuts until the rubber clamps contact each other.
Show/hide table
 | |
| Illustration 3 | g01957864 |
View of the brake pedal and the subframe | |
(D) Clearance from the subframe to the lower front edge of the pedal ... 95.0 ± 6.0 mm (3.74 ± 0.24 inch)
(E) The free travel of the pedal prior to the activation of the brake switch ... 18 ± 2 mm (0.71 ± 0.08 inch)
Caterpillar Information System:
C27 Engine for the AD55B Underground Articulated Truck System Overview
120K Motor Grader Backup Alarm
C27 Engine for the AD55B Underground Articulated Truck Component Location
C9 Engine and D7E Track-Type Tractors ECM Does Not Communicate with Other Modules
120K and 120K Series 2 Motor Graders Air System and Brakes Air Control Valve (Service Brake)
325D, 330D, 345C, M325C and M330D Excavators and M325D L MH and M325D MH Material Handlers Magnet Controller Using Caterpillar Electronic Technician to Determine Diagnostic Codes
793D Off-Highway Truck Restricted Visibility
AccuGrade® GPS (CD700) Settings - Save
325D, 330D, 345C, M325C and M330D Excavators and M325D L MH and M325D MH Material Handlers Magnet Controller Magnet Control, SPN 5005 - FMI 6
325D, 330D, 345C, M325C and M330D Excavators and M325D L MH and M325D MH Material Handlers Magnet Controller Magnet Control, SPN 5005 - FMI 5
325D, 330D, 345C, M325C and M330D Excavators and M325D L MH and M325D MH Material Handlers Magnet Controller Magnet Control, SPN 5005 - FMI 3
325D, 330D, 345C, M325C and M330D Excavators and M325D L MH and M325D MH Material Handlers Magnet Controller Magnet Control, SPN 5004 - FMI 6
120K Motor Grader Steering Frame Lock
C27 Engine for the AD55B Underground Articulated Truck Configuration Parameters
120K and 120K Series 2 Motor Grader Hydraulic and Steering System Centershift Lock
120K Motor Grader Daily Inspection
2008/11/03 A Improved Procedure to Adjust the Stop Light Limit Switch {1432, 1435, 4269}
120K Motor Grader Moldboard Wear Strip - Inspect/Adjust/Replace
AccuGrade® GPS (CD700) Horizontal Guidance
CB54, CB54 XW and CB64 Vibratory Compactor Machine Systems Smooth Drum Scraper
120K Motor Grader Hydraulic System Oil Level - Check
C27 Engine for the AD55B Underground Articulated Truck Cooling Fan Speed - Test
12K, 140K and 160K Motor Graders Circle Drive Oil - Change
24M Motor Grader Assembly Instruction (Split Shipping Configuration){7000, 7960} 24M Motor Grader Assembly Instruction (Split Shipping Configuration){7000, 7960}