3176 DIESEL TRUCK ENGINE SPECIFICATIONS Caterpillar


Ether Starting Aid

Usage:

(1) Ether cylinder assembly. Position ± 20° from vertical.

(2) Clamp assembly. Position clamp assembly 178 mm (7.01 in) vertically above ether valve assembly mounting holes.

(3) Ether valve assembly. With cylinder assembly (1) installed, the valve assembly provides 2.25 cc (.14 cu in) of ether through the steel tube to atomizer assembly (8) in the air inlet manifold system each time control panel switch (4) is pressed for three seconds, then released.

Locate as close to the engine inlet manifold as possible (do not mount on engine).

Do not mount in a location that subjects valve assembly and cylinder assembly (1) to temperatures greater than 93.3° C (200° F).

Install valve assembly so cylinder assembly (1) can be installed in a vertical position as shown.

(4) Control panel switch. Install switch close to operator's starting station. Switch requires clearance hole for 5/8 in. diameter thread, and 38 mm (1.50 in) depth behind control panel or mounting bracket.

(5) Ether valve connector.


Location For Ether Atomizer Assembly And Temperature Switch Assembly.
(6) Temperature switch assembly. (8) Ether atomizer assembly. (9) Temperature regulator housing. (10) Cylinder head. (11) Inlet manifold.

(6) Temperature switch assembly. The temperature switch will not allow starting fluid to reach the atomizer if the engine temperature is above 38° C (100° F). Final installation tighten to 1.2 N·m (11 lb in).

Remove 3/8 pipe plug from temperature regulator housing (9) and install the temperature switch.

(7) Flexible tube assembly. Assemble 3.18 mm (.125 in) O.D. steel tubing between ether valve assembly (3) and ether atomizer assembly (8). Use the flexible tube assembly as a flexible connection between the two lines. The use of any additional length of tubing is not recommended. No electric wires are to be clamped to the ether line.

(8) Ether atomizer assembly. Remove 1/2 pipe plug from inlet manifold (11) and install atomizer assembly. Before atomizer assembly is tightened, turn identification mark to face front or rear of the engine.

Caterpillar Information System:

3176 DIESEL TRUCK ENGINE SPECIFICATIONS Fuel Priming Pump Group
3176 DIESEL TRUCK ENGINE SPECIFICATIONS Fuel Filter Group
3176 DIESEL TRUCK ENGINE SPECIFICATIONS Primary Fuel Filter
3176 DIESEL TRUCK ENGINE SPECIFICATIONS Fuel Transfer Pump
3176 DIESEL TRUCK ENGINE SPECIFICATIONS Fuel Injection Lines Group
3176 DIESEL TRUCK ENGINE SPECIFICATIONS Fuel System Identification
3176 DIESEL TRUCK ENGINE SPECIFICATIONS Engine Design
3176 DIESEL TRUCK ENGINE SPECIFICATIONS Metric Fasteners
3176 DIESEL TRUCK ENGINE SPECIFICATIONS Introduction
G3606 and G3608 Engine Electrical System G3606 and G3608 Engine Electrical System
G3612 and G3616 Engine Electrical System G3612 and G3616 Engine Electrical System
3512B Oil Well Servicing Engine Electrical System 173-2866-01 3512B Oil Well Servicing Engine Electrical System 173-2866-01
3176 DIESEL TRUCK ENGINE SPECIFICATIONS Jake Brake Installation
3176 DIESEL TRUCK ENGINE SPECIFICATIONS Electronic Unit Injector Mechanism Group
3176 DIESEL TRUCK ENGINE SPECIFICATIONS Lifter Group
3176 DIESEL TRUCK ENGINE SPECIFICATIONS Unit Injector Rocker Arm Assembly
3176 DIESEL TRUCK ENGINE SPECIFICATIONS Rocker Arm Shaft Assembly
3176 DIESEL TRUCK ENGINE SPECIFICATIONS Electronically Controlled Unit Injector
3176 DIESEL TRUCK ENGINE SPECIFICATIONS Valve Mechanism Group
3176 DIESEL TRUCK ENGINE SPECIFICATIONS Valve Rocker Arm Group
3176 DIESEL TRUCK ENGINE SPECIFICATIONS Valves
3176 DIESEL TRUCK ENGINE SPECIFICATIONS Valve Mechanism Cover Group
3176 DIESEL TRUCK ENGINE SPECIFICATIONS Cylinder Head
3176 DIESEL TRUCK ENGINE SPECIFICATIONS Exhaust Manifold
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.