Flywheel Housing Runout Face Runout (Axial Eccentricity) Of The Flywheel Housing:
Usage:
8T5096 Dial Indicator Group Installed
1. Fasten a dial indicator to the crankshaft flange so the anvil of the indicator will touch the face of the flywheel housing.
2. Put a force on the crankshaft toward the rear before reading the indicator at each point.
3. With dial indicator set at 0.00 mm (.000 in) at location (A), turn the crankshaft and read the indicator at locations (B), (C) and (D).
4. The difference between lower and higher measurements taken at all four points must not be more than 0.25 mm (.010 in), which is the maximum permissible face run out (axial eccentricity) of the flywheel housing.
Caterpillar Information System:
3208 INDUSTRIAL & MARINE ENGINES Flywheel Runout
3208 INDUSTRIAL & MARINE ENGINES Bearings For Connecting Rods And Mains
3208 INDUSTRIAL & MARINE ENGINES Crankshaft
3208 INDUSTRIAL & MARINE ENGINES Crankshaft Seals
3208 INDUSTRIAL & MARINE ENGINES Pistons And Rings
3208 INDUSTRIAL & MARINE ENGINES Connecting Rod
3208 INDUSTRIAL & MARINE ENGINES Cylinder Block
3208 INDUSTRIAL & MARINE ENGINES Belt Tension Chart
3208 INDUSTRIAL & MARINE ENGINES Water Temperature Regulator
3208 INDUSTRIAL & MARINE ENGINES Water Pump
3208 INDUSTRIAL & MARINE ENGINES Oil Level Gauge
3208 INDUSTRIAL & MARINE ENGINES Oil Pans
3208 INDUSTRIAL & MARINE ENGINES Flywheel Housing Bore
3208 INDUSTRIAL & MARINE ENGINES Pulley And Damper
3208 INDUSTRIAL & MARINE ENGINES Flywheel
3208 INDUSTRIAL & MARINE ENGINES Alternators And Regulators
3208 INDUSTRIAL & MARINE ENGINES Regulator
3208 INDUSTRIAL & MARINE ENGINES Electric Starter Motor
3208 INDUSTRIAL & MARINE ENGINES Shutoff Solenoids
3208 INDUSTRIAL & MARINE ENGINES Systems Operation
3208 INDUSTRIAL & MARINE ENGINES Testing & Adjusting
ELECTRICAL PROTECTION SYSTEM ENERGIZE TO RUN (SI-ETR) Systems Operation
ETR ELECTRICAL PROTECTION SYSTEM Electric Protection System Functional Tests
ETR ELECTRICAL PROTECTION SYSTEM Troubleshooting Full Protection System - Energize To Run System - Oil Pressure, Water Temperature, Overspeed Protection