414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems Caterpillar


Bank Valve (Backhoe) - Install - Pilot Operated

Usage:

432E BXE

安装步骤

表 1
所需工具    
工具     零件号     零件描述     数量    
A     138-7575     连杆支架     2    



    图 1g01413201

  1. 由两个人将阀组 (35) 安装到安装支架 (34) 上。 阀 (35) 的重量约为 25 kg (55 lb)。 安装螺栓 (37) 。



    图 2g01413181

  1. 使用工具 (A) 和适当的起吊设备定位安装支架 (34) 和阀组 (35) 。。 安装支架 (34) 和阀组 (35) 的重量约为 79 kg (175 lb)。



    图 3g01413188



    图 4g01413190

  1. 安装安装支架 (34) 和阀组 (35) 。 安装螺栓 (36) 。



    图 5g01413153

  1. 安置阀组件 (33) ,然后安装螺栓 (32) 。



    图 6g01413143

  1. 安置阀组件 (31) ,然后安装螺栓 (30) 。



    图 7g01413141

  1. 放置歧管组件 (29) ,然后安装螺栓 (28) 。



    图 8g01413136

  1. 连接接头 (27) 。 连接软管组件 (26) 。



    图 9g01413128

  1. 连接软管组件 (25) 。 连接软管 (24) 。



    图 10g01413119

  1. 连接管组件 (23) 。 连接软管组件 (22) 。 连接管组件 (21) 。 连接软管组件 (20) 。



    图 11g01413111

  1. 连接软管组件 (19) 。 连接管组件 (18) 。 连接接头 (17) 。 连接管组件 (16) 。 连接线束组件 (15) 。 连接软管组件 (14) 。



    图 12g01413109

  1. 定位杆 (13) 并将螺栓 (12) 安装到杆 (13) 的两侧。



    图 13g01121318

  1. 安装地板 (11) 和螺栓 (10) 。



    图 14g01121221

  1. 安装导管 (8) 然后安装螺栓 (9) 。



    图 15g01121187

  1. 安装螺栓 (7) 。



    图 16g01121182

  1. 安装百叶 (6) 。

  1. 对其余管组件重复步骤 13 至 15。



    图 17g01121317

  1. 安装地板 (5) 和螺栓 (4) 。



    图 18g01119509

  1. 安装盘 (2) ,然后安装螺栓 (3) 。 对于另一侧,重复本步骤。 安装地板垫 (1) 。

  1. 加注液压油。 请参阅操作和保养手册, "液压系统机油 - 更换"。

Caterpillar Information System:

414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems Bank Valve (Backhoe) - Remove - Pilot Operated
R1600G Load Haul Dump Braking System Pressure Switch (Parking Brake Oil)
140M Motor Grader Engine Supplement Rear Chassis Support - Install
CP54 and CS54 Vibratory Soil Compactors Machine Systems Battery and Wiring Group
CP54 and CS54 Vibratory Soil Compactors Machine Systems Canopy
140M Motor Grader Cab - Install
140M Motor Grader Cab - Remove
CP56B, CP68B, CS56B and CS68B Vibratory Soil Compactors Machine Systems Hydraulic Cylinder (Steering)
2007/09/10 A New Lip Seal Is Now Used {3256, 3258, 3278, 7555}
C11 and C15 Engines for Caterpillar Built Machines E363 High Fuel Supply Temperature
140M Motor Grader Engine Supplement Rear Chassis Support - Remove
2008/08/04 The Cab Wiring Group is Updated {1408}
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems Bank Valve (Loader) - Remove - Pilot Operated
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems Bank Valve (Loader) - Install - Pilot Operated
The Proper Procedures for Troubleshooting Mechanical Unit Injectors (MUI){1251, 1264, 1280, 1288, 1290} The Proper Procedures for Troubleshooting Mechanical Unit Injectors (MUI){1251, 1264, 1280, 1288, 1290}
CP54 and CS54 Vibratory Soil Compactors Machine Systems Machine Wiring
IT38H Integrated Toolcarrier and 938H Wheel Loader Braking and Hydraulic Fan System Service Brake System Pressure - Test
CP54 and CS54 Vibratory Soil Compactors Propel System Propel Lines
CP54 and CS54 Vibratory Soil Compactors Propel System Direction and Speed Control - Cable
Transportation Information {7000} Transportation Information {7000}
Correct Usage of the Oil Rail Plug for the Cylinder Head on C9 Engines{1100} Correct Usage of the Oil Rail Plug for the Cylinder Head on C9 Engines{1100}
2008/02/04 A New Service Kit is Available for the Fan Drive Group {1359}
160M Motor Grader Power Train Front Axle - Remove
160M Motor Grader Machine Systems Fuel Tank - Remove
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.