Battery and Wiring Group
Show/hide table
Illustration 1 | g01411488 |
Right side view |
(1) Torque for nut ... 7.75 ± 0.25 N·m (69 ± 2 lb in)
(2) Torque for nut on the two cable assemblies ... 6 ± 1 N·m (53 ± 1 lb in)
(3) Torque for locknut ... 14 ± 3 N·m (124 ± 27 lb in)
(4) Tighten the terminal nut to 8 ± 2 N·m (71 ± 18 lb in) and tighten the mounting nut to 23 ± 4 N·m (17 ± 3 lb ft).
(5) Torque for nine bolts ... 6 ± 1 N·m (53 ± 9 lb in)
(6) Torque for nut ... 21 ± 3.5 N·m (16 ± 3 lb ft)
Caterpillar Information System:
CP54 and CS54 Vibratory Soil Compactors Machine Systems Canopy
140M Motor Grader Cab - Install
140M Motor Grader Cab - Remove
CP56B, CP68B, CS56B and CS68B Vibratory Soil Compactors Machine Systems Hydraulic Cylinder (Steering)
2007/09/10 A New Lip Seal Is Now Used {3256, 3258, 3278, 7555}
C11 and C15 Engines for Caterpillar Built Machines E363 High Fuel Supply Temperature
140M Motor Grader Engine Supplement Rear Chassis Support - Remove
2008/08/04 The Cab Wiring Group is Updated {1408}
CP54 and CS54 Vibratory Soil Compactors Machine Systems Engine Enclosure (Hood)
2007/12/03 The Exhaust Pipe Groups are Updated {1061}
140M Motor Grader Piston Pump (All Wheel Drive) - Install
938H Wheel Loader and IT38H Integrated Toolcarrier Hydraulic System Relief Valve (Line) - Test and Adjust
140M Motor Grader Engine Supplement Rear Chassis Support - Install
R1600G Load Haul Dump Braking System Pressure Switch (Parking Brake Oil)
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems Bank Valve (Backhoe) - Remove - Pilot Operated
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems Bank Valve (Backhoe) - Install - Pilot Operated
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems Bank Valve (Loader) - Remove - Pilot Operated
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems Bank Valve (Loader) - Install - Pilot Operated
The Proper Procedures for Troubleshooting Mechanical Unit Injectors (MUI){1251, 1264, 1280, 1288, 1290} The Proper Procedures for Troubleshooting Mechanical Unit Injectors (MUI){1251, 1264, 1280, 1288, 1290}
CP54 and CS54 Vibratory Soil Compactors Machine Systems Machine Wiring
IT38H Integrated Toolcarrier and 938H Wheel Loader Braking and Hydraulic Fan System Service Brake System Pressure - Test
CP54 and CS54 Vibratory Soil Compactors Propel System Propel Lines
CP54 and CS54 Vibratory Soil Compactors Propel System Direction and Speed Control - Cable
Transportation Information {7000} Transportation Information {7000}