Usage:
Section View Of Heater Assembly
(1) Heater assembly.
(2) Tighten nuts to a torque of ... 7.8 ± 1 N·m (69 ± 9 lb in)
11 VAC, 1000 W ... 92 ± 2 A
NOTE: When assembling air inlet heater to intake manifold and air inlet elbow, clean air inlet heater joint faces with solvent. Apply 6V1541 Quick Cure Primer to joint faces. Allow primer to air dry three to five minutes minimum. Apply 1U8846 Gasket Maker to joint face and spread uniformly. Heater must be assembled and tightened within ten minutes.
Section View Of Heater Assembly
(1) Heater assembly.
(2) Tighten nuts to a torque of ... 12.8 ± 1 N·m (113 ± 9 lb in)
22 VAC, 2160 W ... 98 ± 9.8 A
NOTE: When assembling air inlet heater to intake manifold and air inlet elbow, clean air inlet heater joint faces with solvent. Apply 6V1541 Quick Cure Primer to joint faces. Allow primer to air dry three to five minutes minimum. Apply 1U8846 Gasket Maker to joint face and spread uniformly. Heater must be assembled and tightened within ten minutes.