Valves And Valve Springs
Usage:
NOTE: GUIDELINE FOR REUSABLE PARTS: VALVES AND VALVE SPRINGS, Forms SEBF8002 and SEBF8034 have the procedures and specifications necessary for checking used valves and valve springs.
(1) 9N3617 Spring for valves (new):
Length under test force ... 42.04 mm (1.655 in.)
Test force ... 222 ± 22 N (49 ± 6 lb.)
Length of spring at valve open position ... 29.64 mm (1.167 in.)
Use again minimum load at valve open position ... 687 N (154.5 lb.)
Free length after test ... 47.09 mm (1.854 in.)
Outside diameter ... 36.58 mm (1.440 in.)
Spring must not be bent more than ... 1.65 mm (.065 in.)
Caterpillar Information System:
3204 Industrial Engines Cylinder Head
3204 Industrial Engines Camshaft
3204 Industrial Engines Timing Gears
3204 Industrial Engines Governor
3204 Industrial Engines Fuel Injection Lines
3204 Industrial Engines Fuel Injection Nozzle
3204 Industrial Engines Fuel Injection Equipment
3204 Industrial Engines Engine Design 3204 DI NA and 3204 DI T
3204 Industrial Engines Introduction
SAFETY INFORMATION Important Safety Information
GENERATOR SET, INDUSTRIAL AND MARINE ENGINES ELECTRIC PROTEC Electric Shut-Off Wiring Diagrams
GENERATOR SET, INDUSTRIAL AND MARINE ENGINES ELECTRIC PROTEC Procedure F
3204 Industrial Engines Valve Cover And Base
3204 Industrial Engines Valve Seats And Inserts
3204 Industrial Engines Valve Rocker Arms And Lifters
3204 Industrial Engines Turbocharger Impeller Installation
3204 Industrial Engines Turbocharger (AiResearch T04B65)
3204 Industrial Engines Air Breather
3204 Industrial Engines Exhaust Manifold
3204 Industrial Engines Oil Pump
3204 Industrial Engines Oil Filter
3204 Industrial Engines Oil Pan
3204 Industrial Engines Water Temperature Regulator And Water Lines
3204 Industrial Engines Water Pump