Usage:
HEAD BOLT LOCATION AND TIGHTENING SEQUENCE
(1) Put 5P3931 Anti-Seize Compound on bolt threads and tighten bolts according to the procedure that follows:
Step 1. Tighten bolts 1 thru 18 in number sequence to ... 80 ± 14 N·m (60 ± 10 lb. ft.)
Step 2. Tighten bolts 1 thru 18 in number sequence to ... 150 ± 7 N·m (110 ± 5 lb. ft.)
Step 3. Again tighten bolts 1 thru 18 in number sequence to ... 150 ± 7 N·m (110 ± 5 lb. ft.)
Step 4. Tighten bolts 19 thru 22 in number sequence to ... 43 ± 7 N·m (32 ± 5 lb. ft.)
SECTION A-A
(2) Holes for fuel injection nozzles.
(3) Thickness of cylinder head [measure through the fuel injection nozzle holes at each end of the cylinder head].
NOTE: Thickness given is from the bottom of the cylinder head to the bottom of the spotface for the fuel injection nozzle holes.
New ... 95.86 ± 0.13 mm (3.774 ± .005 in.)
Minimum permissible thickness ... 95.45 mm (3.758 in.)