Tow Point Cylinders
Show/hide table
Illustration 1 | g01106657 |
- Move the tow point control switch (1) to the UP or the DOWN position. Align the hole in tow arm (2) to the desired hole in support (3) .
- Install the pin through the tow arm and the support.
- Repeat the procedure for the other side of the machine.
- In order to enable the tow point cylinders, reverse the steps 1 through 3.
Caterpillar Information System:
416D, 420D, 424D, 428D, 432D and 442D Backhoe Loaders Hydraulic and Steering System Oil Filter (Hydraulic)
120M and 12M Motor Graders Braking and Hydraulic Fan System Shuttle Valve (Brake Accumulator)
PF-300C and PS-300C Pneumatic Compactors Engine Supplement Engine and Transmission - Remove
14M and 16M Motor Graders Location of Components
C9 Industrial Engines Alternator and Regulator
C7 Engines for Caterpillar Built Machines Lifter Group
2006/02/27 Engaging the High Flow Auxiliary Circuit {1408, 5705, 7610}
Asphalt Pavers Burner Electronic Control System Right Extender Burner Control
583T Pipelayer Power Train Steering and Transmission Hand Control
AP-1000B, AP-1050B, AP-1055B, AP-650B, BG-225C, BG-2455C, BG-245C and BG-260C Asphalt Pavers Propel Electronic Control System Electronic Control Module (ECM)
583T Pipelayer Power Train Drive Shaft
PL83 and PL87 Pipelayer Systems Bevel and Transfer Gears
2004/12/13 New Software Improves the Function of the Oil Renewal System (ORS) {7620}
2004/10/01 A New Fuel Transfer Pump is Used {1256}
2004/10/04 A New Fuel Transfer Pump is Used {1256}
Asphalt Pavers Conveyor Electronic Control System General Information
AP-1000B, AP-1050B, AP-1055B, AP-650B, BG-225C, BG-2455C, BG-245C and BG-260C Asphalt Pavers Propel Electronic Control System Switches
AP-650B and BG-225C Asphalt Pavers Machine Controls
Asphalt Pavers Conveyor Electronic Control System Conveyor Speed Control
986H Wheel Loader Drive Shaft Spline (Center) - Lubricate
Asphalt Pavers Conveyor Electronic Control System Front Wheel Assist Control
AP-1000B, AP-1050B, AP-1055B, AP-650B, BG-225C, BG-2455C, BG-245C and BG-260C Asphalt Pavers Propel Electronic Control System Sensors
Asphalt Pavers Conveyor Electronic Control System ECM Modes
966H and 972H Wheel Loaders Logging Fork Clamp - Lubricate - If Equipped