Water Temperature Gauges
Usage:
7W2061
7W2061 Gauge 12V; Use with 5L7443 Sending Unit
Range ... 38 to 116°C (100 to 240°F)
Test voltage ... 13.8 ± 0.3V
Tolerance ... ±0.76 mm (.03 in)
NOTE: Measure tolerance from the end of the pointer to the centerline of the mark on the face of the indicator.
7W2060
7W2060 Gauge 24-32V; Use with 5L7442 Sending Unit
Range ... 38 to 116°C (100 to 240°F)
Test voltage ... 27.2 ± 0.3V
Tolerance ... ±0.76 mm (.03 in)
NOTE: Measure tolerance from the end of the pointer to the centerline of the mark on the face of the indicator.
NOTE: For 32V systems the 5L7441 resistor (65 ohms) is used with this gauge.
Caterpillar Information System:
3406C INDUSTRIAL ENGINE Fuel Pressure Gauge
3406C INDUSTRIAL ENGINE Temperature Gauge
3406C INDUSTRIAL ENGINE Ammeter Gauge
3406C INDUSTRIAL ENGINE Service Meter
3406C INDUSTRIAL ENGINE Tachometer (Digital)
3406C INDUSTRIAL ENGINE Air Shutoff Group And Solenoid
3406C INDUSTRIAL ENGINE Shutoff Solenoid
3406C INDUSTRIAL ENGINE Starting Motor
3406C INDUSTRIAL ENGINE Alternator And Regulator
3406C INDUSTRIAL ENGINE Alternator Mounting Group
3406C INDUSTRIAL ENGINE Auxiliary Drive
3406C INDUSTRIAL ENGINE Rear Stub Shaft
3406C INDUSTRIAL ENGINE Oil Pressure Gauges
3406C INDUSTRIAL ENGINE Sending Units For Water Temperature Gauge
3406C INDUSTRIAL ENGINE Sending Units For Oil Pressure Gauge
3406C INDUSTRIAL ENGINE Temperature Switches
3406C INDUSTRIAL ENGINE Pressure Switch
3406C INDUSTRIAL ENGINE Starter Magnetic Switch
3406C INDUSTRIAL ENGINE Air Starting Motor
3406C INDUSTRIAL ENGINE Pressure Regulating Valve
3406C INDUSTRIAL ENGINE Systems Operation
3406C INDUSTRIAL ENGINE Testing & Adjusting
3054 TRUCK ENGINE Systems Operation
3054 TRUCK ENGINE Testing & Adjusting