Serviceable Parts for the 166-0294 Work Tool Harness As {1408, 7000}
- Angle Broom:
- BA18 (S/N: ACE1-UP)
- Cold Planer:
- PC6 (S/N: AKS1-UP)
- Stump Grinder:
- SG16 (S/N: ALJ1-UP)
- Multi Terrain Loader:
- 247 (S/N: CML1-UP)
- Skid Steer Loader:
- 216 (S/N: 4NZ1-UP)
- PC9 (S/N: ALC1-UP)
- SG18 (S/N: AMG1-UP)
- 257 (S/N: CMM1-UP)
- 267 (S/N: CMP1-UP)
- 277 (S/N: CNC1-UP)
- 287 (S/N: CNY1-UP)
- 226 (S/N: 5FZ1-UP)
- 228 (S/N: 6BZ1-UP)
- 232 (S/N: CAB1-UP)
- 236 (S/N: 4YZ1-UP)
- 242 (S/N: CMB1-UP)
- 246 (S/N: 5SZ1-UP)
- 248 (S/N: 6LZ1-UP)
- 252 (S/N: FDG1-UP)
- 262 (S/N: CED1-UP)
The serviceable parts for the 166-0294 Work Tool Harness As are identified in Table 1. See Illustration 1.
Show/hide table
Illustration 1 | g00959569 |
The 166-0294 Work Tool Harness As (1) 7T-0094 Connector Socket (2) 8C-5444 Rectifier Diode (3) 8T-8737 Seal Plug (4) 125-7874 Heat Shrink Tubing (5) 125-7875 Heat Shrink Tubing (6) 155-2261 Plug Lock Wedge (7) 172-3998 Plug As |
Show/hide table
Serviceable Parts for the 166-0294 Work Tool Harness As     | |||
---|---|---|---|
Item     | Quantity     | Part Number     | Description     |
1     | 5     | 7T-0094     | Connector Socket     |
2     | 2     | 8C-5444     | Rectifier Diode     |
3     | 3     | 8T-8737     | Seal Plug     |
4     | 20 cm (8.0 inch)     |
125-7874     | Heat Shrink Tubing     |
5     | 5 cm (2.0 inch)     |
125-7875     | Heat Shrink Tubing     |
6     | 5     | 155-2261     | Plug Lock Wedge     |
7     | 1     | 172-3998     | Plug As     |
Other components of the 166-0294 Work Tool Harness As that are nonserviceable can be obtained by ordering the service replacement parts. See Table 2.
Show/hide table
Component     | Service Replacement Part     |
---|---|
155-2269 Connector Plug     | 155-2270 Connecting Plug Kit (Two Pin)     |
126-1766 Connector Socket     | 9X-3402 Connector Socket     |
6A-3626 Electrical Wire     | 5P-5624 Electrical Wire (14 GA)     |
6A-3361 Electrical Wire     | |
5P-5017 Electrical Wire     | |
5P-0648 Electrical Wire     | |
5P-0658 Electrical Wire     | |
5P-4516 Electrical Wire     |
Caterpillar Information System:
416D Backhoe Loader Fuel Tank Water and Sediment - Drain
RM-350B Road Reclaimer/Soil Stabilizer Machine Systems Piston Pump (Auxiliary) - Install
C15 and C18 Petroleum Generator Sets Fuel Conservation Practices
C11 and C13 Engines for Caterpillar Built Machines Inlet Manifold Pressure - Test
416D Backhoe Loader Tire Inflation - Check
3054C Industrial Engine Fuel Injection Lines - Remove and Install
247, 257, 267, 277 and 287 Multi Terrain Loaders Lower Machine Frame - Clean
RM-350B Road Reclaimer/Soil Stabilizer Maintenance Interval Schedule
2003/03/10 New Flash File Software Is Used for Product Link 151/201 {7620}
769D Off-Highway Truck/Tractor and 771D Quarry Truck Power Train Oil Filter (Power Train)
3054E Industrial Engine Glow Plugs - Remove and Install
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Monitor System Features
RM-350B Road Reclaimer/Soil Stabilizer Machine Systems Piston Pump (Auxiliary) - Disassemble
3054C Industrial Engine Fuel Injection Nozzles - Remove
C11 and C13 Engines for Caterpillar Built Machines Fuel System Pressure - Test
3054C Industrial Engine Fuel Injection Nozzles - Install
AP-655C and BG-2255C Asphalt Pavers Drag Conveyor and Auger Conveyor Systems Location of Electrical Components (Auger Conveyor)
2004/05/03 New Midshaft Bearing Assemblies Now Used to Increase Service Life {3253}
PM-465 Cold Planer Additional Messages
789C Off-Highway Truck Machine Systems Summary of Revisions
AP-655C and BG-2255C Asphalt Pavers Machine Systems Hydraulic Schematic (Auxiliary Systems)
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Engine Supplement Hood - Remove
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Engine Supplement Hood - Install
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Engine Supplement Hood Tilt Actuator - Remove and Install