Air Cleaner Housing
Usage:
Remove Air Cleaner Housing
NOTE: The D348 Industrial Engine is shown.
1. Remove bolts (1) from the lower mounting brackets on each side of the air cleaner housing.
2. Loosen clamp (3). Remove bolts (2) that hold the upper mounting brackets to the air cleaner housing.
3. Remove air cleaner housing (4).
Install Air Cleaner Housing
1. Put air cleaner housing (1) in position and install the bolts that hold upper mounting brackets (2) and lower mounting brackets (3) to the air cleaner housing.
2. Tighten clamp (4).
Caterpillar Information System:
D348 INDUSTRIAL & MARINE ENGINES General Instructions Disassembly And Assembly
D348 INDUSTRIAL & MARINE ENGINES Testing And Adjusting
D348 INDUSTRIAL & MARINE ENGINES Systems Operation
D348 INDUSTRIAL & MARINE ENGINES Prelubrication Pump
D348 INDUSTRIAL & MARINE ENGINES Prelubrication Pump Motor Relay
D348 INDUSTRIAL & MARINE ENGINES Shut Off Valve (Water Temperature) (4L7108)
D348 INDUSTRIAL & MARINE ENGINES Governor Air Actuators (2N6006, 1N9318)
D348 INDUSTRIAL & MARINE ENGINES Prelubrication Pump Motor (Electric)
D348 INDUSTRIAL & MARINE ENGINES Air Valves For Air Starting System
D348 INDUSTRIAL & MARINE ENGINES Governor Air Actuator Linkage
D348 INDUSTRIAL & MARINE ENGINES Auxiliary Drive
D348 INDUSTRIAL & MARINE ENGINES Mechanical Overspeed Shutoff
D348 INDUSTRIAL & MARINE ENGINES Turbochargers
D348 INDUSTRIAL & MARINE ENGINES Exhaust Manifolds (Industrial Engine)
D348 INDUSTRIAL & MARINE ENGINES Exhaust Manifolds (Marine Engine)
D348 INDUSTRIAL & MARINE ENGINES Aftercooler Cores And Housings (Earlier Engine)
D348 INDUSTRIAL & MARINE ENGINES Aftercooler Cores And Housings (Later Engine)
D348 INDUSTRIAL & MARINE ENGINES Valve Covers
D348 INDUSTRIAL & MARINE ENGINES Camshaft Housings
D348 INDUSTRIAL & MARINE ENGINES Cylinder Heads
D348 INDUSTRIAL & MARINE ENGINES Spacer Plates
D348 INDUSTRIAL & MARINE ENGINES Cylinder Liners
D348 INDUSTRIAL & MARINE ENGINES Fan And Fan Drive
D348 INDUSTRIAL & MARINE ENGINES Fan Drive