Air Inlet Manifold
Usage:
Remove Air Inlet Manifold
start by:
a) remove air cleaner
1. Loosen clamp (2) around the recirculation tube (4). Move tube away from manifold.
2. Remove seven bolts (3) and one stud bolt (5) from inlet manifold. Remove inlet manifold (1).
3. Put tape over cylinder head openings to keep out dirt.
Install Air Inlet Manifold
1. Put air inlet manifold (9) in position on the cylinder heads.
- a) Tighten bolts (3) and (4) first to a torque of 15 ± 5 lb. ft. (20 ± 7 N·m)
- b) Tighten bolts (1) through (8) by number sequence to a final torque of 32 ± 5 lb. ft. (43 ± 7 N·m).
2. Install and tighten the seven bolts and one stud bolt. Tighten the bolts as follows:
3. Install recirculation tube (10) on inlet manifold. Tighten the clamp.
Show/hide table
NOTICE |
---|
Make sure that recirculation tube (10) is fastened correctly so that dirt cannot get into the air inlet manifold. |
end by:
a) install air cleaner
Caterpillar Information System:
3208 TRUCK ENGINE EGR Valve
3208 TRUCK ENGINE Actuator
3208 TRUCK ENGINE Actuator And EGR Valve
3208 TRUCK ENGINE EGR Switch Assembly
3208 TRUCK ENGINE EGR Switch Cover
3208 TRUCK ENGINE Automatic Timing Advance Unit 3° For EGR Engine
3208 TRUCK ENGINE EGR Actuator And EGR Valve
3208 TRUCK ENGINE EGR Valve
3208 TRUCK ENGINE EGR Actuator
3208 TRUCK ENGINE EGR Tube
3208 TRUCK ENGINE Breather
3208 TRUCK ENGINE Air Inlet Manifold
3208 TRUCK ENGINE Crankcase Breather
3208 TRUCK ENGINE Systems Operation
3208 TRUCK ENGINE Testing And Adjusting
3208 TRUCK ENGINE Air Inlet Manifold
3208 TRUCK ENGINE Breather
3208 TRUCK ENGINE Exhaust Recirculation Tube
3208 TRUCK ENGINE Actuator
3208 TRUCK ENGINE Valve
3208 TRUCK ENGINE Actuator And Valve
3208 TRUCK ENGINE AUTOMATIC TIMING ADVANCE UNIT 3° FOR LOW EMISSION ENGINE
3208 TRUCK ENGINE Switch Cover
3208 TRUCK ENGINE Exhaust Recirculation Electronic Control