EGR Valve
Usage:
Disassemble And Assemble EGR Valve
start by:
a) disassemble actuator
1. Remove two bolts (2), then lock (4), and large plate (1) from outlet port. Remove small plate from the inlet port (3).
2. Remove shaft (5) from housing. Check shaft bushings in housing for damage. If necessary, remove bushings.
3. Install bushings in housing with tool group (A). Install shaft (5). Make sure that shaft moves freely in housing.
4. Install plates, locks and bolts in their respective positions.
end by:
a) assemble actuator
Caterpillar Information System:
3208 TRUCK ENGINE Actuator
3208 TRUCK ENGINE Actuator And EGR Valve
3208 TRUCK ENGINE EGR Switch Assembly
3208 TRUCK ENGINE EGR Switch Cover
3208 TRUCK ENGINE Automatic Timing Advance Unit 3° For EGR Engine
3208 TRUCK ENGINE EGR Actuator And EGR Valve
3208 TRUCK ENGINE EGR Valve
3208 TRUCK ENGINE EGR Actuator
3208 TRUCK ENGINE EGR Tube
3208 TRUCK ENGINE Breather
3208 TRUCK ENGINE Air Inlet Manifold
3208 TRUCK ENGINE Testing And Adjusting
3208 TRUCK ENGINE Air Inlet Manifold
3208 TRUCK ENGINE Crankcase Breather
3208 TRUCK ENGINE Systems Operation
3208 TRUCK ENGINE Testing And Adjusting
3208 TRUCK ENGINE Air Inlet Manifold
3208 TRUCK ENGINE Breather
3208 TRUCK ENGINE Exhaust Recirculation Tube
3208 TRUCK ENGINE Actuator
3208 TRUCK ENGINE Valve
3208 TRUCK ENGINE Actuator And Valve
3208 TRUCK ENGINE AUTOMATIC TIMING ADVANCE UNIT 3° FOR LOW EMISSION ENGINE
3208 TRUCK ENGINE Switch Cover