3208 TRUCK ENGINE Caterpillar


Actuator And EGR Valve

Usage:

Remove Actuator And EGR Valve

1. Remove four bolts (2). Then remove cover (1) for the actuator and EGR valve.

2. Disconnect lines (3) and (6). Remove nuts and bolts (4) that hold actuator and EGR valve to the exhaust manifold and EGR tube.

3. Remove actuator and EGR valve (5). Remove and inspect gaskets on exhaust manifold and EGR tube. Make a replacement if necessary.

Install Actuator And EGR Valve

1. Install new gaskets on exhaust manifold and EGR tube.

2. Put actuator and EGR valve (1) in position on the exhaust manifold and EGR tube. Install the nuts and bolts that hold the unit.

3. Connect the three lines (2) and (3) to the oil cooler and oil pan.

4. Install cover (4) with the bolts that hold it.

Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.