3208 TRUCK ENGINE Caterpillar


EGR Switch Assembly

Usage:

Remove EGR Switch Assembly

1. Disconnect wires (4) at connector (3) and fuse holder.

2. Remove two bolts (1) then remove switch assembly cover (2).

3. Remove nut (5) and screw (6), then remove EGR switch assembly (7).

4. Remove load stop pin (9). Remove gasket (8). Inspect the gasket and make a replacement if necessary.

Install EGR Switch Assembly

1. Install a new gasket (4). Install load stop pin (5).

2. Put EGR switch assembly (2) in position and install nut (1) and screw (3) that hold it.

3. Install switch assembly cover (7) with two bolts (6) that hold it.

4. Connect wires (9) to the fuse holder and connector (8).

Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.