3208 TRUCK ENGINE Caterpillar


Mounting Group For AT540, MT643, And MT653 Allison Transmission

Usage:

(1) Maximum face runout of flexplate measured at bolt circle diameter ... .030 in.(0.76 mm)

(2) Bore runout of spacer T.I.R.

(Total indicator reading)

AT540 ... .020 in.(0.51 mm)

MT643, MT653 ... .008 in.(0.20 mm)

(3) Face runout of spacer T.I.R.

(Total indicator reading)

AT540 ... .020 in.(0.51 mm)

MT643, MT653 ... .008 in.(0.20 mm)

(4) Torque for bolts that hold flywheel and adapter to crankshaft ... 55 ± 5 lb.ft.(75 ± 7 N·m)

(5) Bore runout of adapter T.I.R.

(Total indicator reading)

AT540 ... .010 in.(0.25 mm)

MT643, MT653 ... .005 in.(0.13 mm)

(6) Face runout of adapter with flexplate installed [measured 3.00 in. (76.2 mm) from center of bore] (Total indicator reading) ... .003 in.(0.08 mm)

Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.