Electric Starting Motor
Usage:
Remove Electric Starting Motor
1. Disconnect the wires from starting motor.
2. Fasten a hoist to the starter. Remove three bolts (1) that hold starting motor to flywheel housing. Remove the electric starting motor. Weight is 70 lb. (32 kg).
Install Electric Starting Motor
1. Fasten a hoist and install electric starting motor on engine. Install the three bolts that hold starting motor to flywheel housing.
2. Connect the wires to starting motor.
Caterpillar Information System:
3406 DIESEL TRUCK ENGINE Air Compressor
3406 DIESEL TRUCK ENGINE Air Compressor Governor
3406 DIESEL TRUCK ENGINE Fuel Injection Lines
3406 DIESEL TRUCK ENGINE Engine Overhaul In Chassis
3406 DIESEL TRUCK ENGINE Disassembly And Assembly
3406 DIESEL TRUCK ENGINE Engine Vibration Troubleshooting
3406 DIESEL TRUCK ENGINE Fuel In Crankcase Oil
3406 DIESEL TRUCK ENGINE Loss Of Coolant
3406 DIESEL TRUCK ENGINE Cooling System
3406 DIESEL TRUCK ENGINE Difficult Starting
3406 DIESEL TRUCK ENGINE Too Much Exhaust Smoke
3406 DIESEL TRUCK ENGINE Misfiring And Running Rough
3406 DIESEL TRUCK ENGINE Accessory Drive
3406 DIESEL TRUCK ENGINE Tachometer Drive
3406 DIESEL TRUCK ENGINE Fuel Priming Pump
3406 DIESEL TRUCK ENGINE Fuel Filter Base
3406 DIESEL TRUCK ENGINE Fuel Transfer Pump
3406 DIESEL TRUCK ENGINE Fuel Transfer Pump (Later)
3406 DIESEL TRUCK ENGINE Automatic Timing Advance
3406 DIESEL TRUCK ENGINE Fuel Ratio Control
3406 DIESEL TRUCK ENGINE Fuel Shutoff Solenoid
3406 DIESEL TRUCK ENGINE Fuel Injection Pump Housing And Governor (Earlier)
3406 DIESEL TRUCK ENGINE Fuel Injection Pump Housing And Governor (Earlier And Later)
3406 DIESEL TRUCK ENGINE Fuel Injection Pump Housing And Governor