Loss Of Coolant
Usage:
Recommended Procedure
A. Outside Leaks
- 1. Leaks in Hoses or Connections ... Check all hoses and connections for visual signs of leakage. If no leaks are seen, look for damage to hoses or loose clamps.
- 2. Leaks in the Radiator and/or Expansion Tank ... Put pressure to the radiator and/or expansion tank with the 9S8140 Cooling System Pressurizing Pump Group and check for leaks.
- 3. Leaks in the Heater ... Put pressure to the cooling system with the 9S8140 Cooling System Pressurizing Pump Group and check the heater for leaks.
- 4. Leaks in the Water Pump ... Check the water pump for leaks before starting the engine, then start the engine and look for leaks. If there are leaks at the water pump, repair or install a new water pump.
- 5. Cylinder Head Gasket Leakage ... Look for leaks along the surface of the cylinder head gasket. If you see leaks, install a new head gasket.
- 2. Leaks in the Radiator and/or Expansion Tank ... Put pressure to the radiator and/or expansion tank with the 9S8140 Cooling System Pressurizing Pump Group and check for leaks.
B. Coolant Leaks At The Overflow Tube
- 6. Bad Pressure Cap or Relief Valve ... Check the sealing surfaces of the pressure cap and the radiator to be sure the cap is sealing correctly. Check the opening pressure and sealing ability of the pressure cap or relief valve with the 9S8140 Cooling System Pressurizing Pump Group.
- 7. Engine Runs Too Hot ... If coolant temperature is too high, pressure will be high enough to move the cap off of the sealing surface in the radiator and cause coolant loss through the overflow tube. See "Above Normal Heating" in COOLING SYSTEM Chart.
- 8. Expansion Tank Too Small or Installed Wrong ... The expansion tank can be either a part of the radiator or it can be installed separately from the radiator. The expansion tank must be large enough to hold the expansion of the coolant as it gets warm or has sudden changes in pressure. Make sure the expansion tank is installed correctly, and the size is according to the recommendations of the Truck Manufacturer.
- 9. Cylinder Head Gasket Leakage or Crack(s) in Cylinder Head or Cylinder Block...Remove the radiator cap and, with the engine running, look for air bubbles in the coolant. Bubbles in the coolant are a sign of probable leakage at the head gasket. Remove the cylinder head from the engine. Check cylinder head, cylinder walls and head gasket surface of the cylinder block for cracks. When the head is installed, use a new head gasket, spacer plate gasket, water seals, and O-ring seals.
- 7. Engine Runs Too Hot ... If coolant temperature is too high, pressure will be high enough to move the cap off of the sealing surface in the radiator and cause coolant loss through the overflow tube. See "Above Normal Heating" in COOLING SYSTEM Chart.
C. Inside Leakage
- 10. Cylinder Head Gasket Leakage ... If the cylinder head gasket leaks between a water passage and an opening into the crankcase, coolant will get into the crankcase.
- 11. Crack(s) in Cylinder Head ... Crack(s) in the upper surface of the cylinder head, or an area between a water passage and an opening into the crankcase, can allow coolant to get into the crankcase.
- 12. Crack(s) in Cylinder Block ... Crack(s) in the cylinder block between a water passage and the crankcase will let coolant get into the crankcase.
- 11. Crack(s) in Cylinder Head ... Crack(s) in the upper surface of the cylinder head, or an area between a water passage and an opening into the crankcase, can allow coolant to get into the crankcase.
Caterpillar Information System:
3406 DIESEL TRUCK ENGINE Cooling System
3406 DIESEL TRUCK ENGINE Difficult Starting
3406 DIESEL TRUCK ENGINE Too Much Exhaust Smoke
3406 DIESEL TRUCK ENGINE Misfiring And Running Rough
3406 DIESEL TRUCK ENGINE Problem With Vehicle Or Vehicle Operation
3406 DIESEL TRUCK ENGINE High Fuel Consumption Troubleshooting
3406 DIESEL TRUCK ENGINE Primary Engine Test For High Fuel Consumption
3406 DIESEL TRUCK ENGINE Low Power Troubleshooting
3406 DIESEL TRUCK ENGINE Primary Engine Test For Low Power
3406 DIESEL TRUCK ENGINE Introduction To The Troubleshooting Guide
3406 DIESEL TRUCK ENGINE Testing And Adjusting
3406 DIESEL TRUCK ENGINE Systems Operation
3406 DIESEL TRUCK ENGINE Fuel In Crankcase Oil
3406 DIESEL TRUCK ENGINE Engine Vibration Troubleshooting
3406 DIESEL TRUCK ENGINE Disassembly And Assembly
3406 DIESEL TRUCK ENGINE Engine Overhaul In Chassis
3406 DIESEL TRUCK ENGINE Fuel Injection Lines
3406 DIESEL TRUCK ENGINE Air Compressor Governor
3406 DIESEL TRUCK ENGINE Air Compressor
3406 DIESEL TRUCK ENGINE Electric Starting Motor
3406 DIESEL TRUCK ENGINE Accessory Drive
3406 DIESEL TRUCK ENGINE Tachometer Drive
3406 DIESEL TRUCK ENGINE Fuel Priming Pump
3406 DIESEL TRUCK ENGINE Fuel Filter Base