3406 DIESEL TRUCK ENGINE Caterpillar


Flywheels

Usage:

(Without BrakeSaver)

(1) Maximum permissible change in distance from center of bore (eccentricity) during one rotation (total indicator reading) ... .006 in.(0.15 mm)

(2) Maximum permissible change in distance from center of bore (eccentricity) during one rotation (total indicator reading) ... .005 in.(0.13 mm)

(3) Diameter of bore after assembly ... 2.8335 +.0011 -.0006 in.(71.971 +0.028 -0.015 mm)

(4) Torque for the bolts that hold the flywheel to the crankshaft ... 200 ± 20 lb. ft.(270 ± 25 N·m)

NOTE: Put engine oil on threads before assembly.

(5) Maximum permissible change from an exact vertical face (run out) during one rotation (total indicator reading) ... .006 in.(0.15 mm)

(With BrakeSaver)

(1) Maximum permissible change in distance from center of bore (eccentricity) during one rotation (total indicator reading) ... .010 in.(0.25 mm)

(2) Maximum permissible change in distance from center of bore (eccentricity) during one rotation (total indicator reading) ... .010 in.(0.25 mm)

(3) Torque for the bolts that hold the flywheel to the crankshaft ... 200 ± 20 lb. ft.(270 ± 25 N·m)

NOTE: Put engine oil on threads before assembly.

(4) Maximum permissible change from an exact vertical face (run out) during one rotation (total indicator reading) ... .012 in.(0.30 mm)

Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.