Usage:
start by:
a) remove fuel filter housing
1. Remove oil from the filter housing.
2. Remove bolt that holds clamp (2) to manifold.
3. Remove the clamp (1) that holds outlet lines together. Install two 3/8"-16 NC forged eyebolts, washers and nuts in bracket.
4. Fasten a hoist. Remove the four bolts (3) that hold housing to block.
5. Remove oil filter housing. Weight is 110 lb. (50 kg).
Install Oil Filter Housing
1. Fasten a hoist to the filter housing.
2. Install a new seal in back of the housing.
3. Put the housing in position on engine. Install bolts that hold housing on engine.
4. Install clamp that holds outlet lines together. Install bolt that holds clamp to the manifold.
5. Check the oil level in crankcase. Fill to the correct level.
end by:
a) install fuel filter housing