Usage:
start by:
a) remove sea water pump (if so equipped)
1. Remove three nuts (4) that hold cover (2) to accessory drive. Remove cover (2).
2. Remove four bolts (3) that hold accessory drive to timing gear cover.
3. Remove accessory drive (1) from timing gear cover.
Install Accessory Drive (If So Equipped)
1. Put accessory drive in position on timing gear cover so accessory drive gear is in alignment with the camshaft gear.
2. Install four bolts.
3. Install cover and three nuts.
end by:
a) install sea water pump (if so equipped)
Disassemble Accessory Drive
start by:
a) remove accessory drive
1. Remove four bolts (2) and the plate (1) that hold gear assembly in bearing assembly (3).
2. Remove gear assembly (4) from the bearing assembly (3).
3. Remove four bolts (5) and cover (6) from gear.
Assemble Accessory Drive
1. Install cover and four bolts on gear.
2. Install gear assembly (1) in the bearing assembly (2).
3. Install plate (4) and four bolts (3) that hold gear assembly in the bearing assembly.
end by:
a) install accessory drive