3406 INDUSTRIAL & MARINE ENGINES Caterpillar


Flywheels

Usage:

(1) Maximum permissible eccentricity (change in distance from center of bore) during one rotation ... .006 in.(0.15 mm)

(2) Gear maximum temperature for installation ... 600° F(316° C)

NOTE: If the gear has a large chamfer on one side of the teeth only; install the gear with the chamfer toward the crankshaft side of the flywheel.

(3) Apply engine oil to the threads of the flywheel bolts. Install the bolts and tighten them to a torque of 200 ± 20 lb. ft. (270 ± 25 N·m)

(4) Maximum permissible eccentricity (change in distance from center of bore) during one rotation ... .005 in.(0.13 mm)

(5) Maximum permissible runout (change from and exact vertical face) during one rotation ... .006 in.(0.15 mm)

Caterpillar Information System:

3406 INDUSTRIAL & MARINE ENGINES Primary Fuel Filter
3406 INDUSTRIAL & MARINE ENGINES Radiators (4N3014, 4N3015, 4N3016, 4N3023)
3406 INDUSTRIAL & MARINE ENGINES Air Fuel Ratio Controls
3406 INDUSTRIAL & MARINE ENGINES Governor Controls
3406 INDUSTRIAL & MARINE ENGINES Pressure Switch 2L3402 Switch
3406 INDUSTRIAL & MARINE ENGINES Oil Pressure Switch 2N7744 Switch (Texas Instrument No. 20PS66-1)
3406 INDUSTRIAL & MARINE ENGINES Governor Air Actuator
3406 INDUSTRIAL & MARINE ENGINES Governor Linkage
3406 INDUSTRIAL & MARINE ENGINES Woodward PSG Governor
3406 INDUSTRIAL & MARINE ENGINES Introduction
3406 INDUSTRIAL & MARINE ENGINES Testing And Adjusting
3406 INDUSTRIAL & MARINE ENGINES Systems Operation
3406 INDUSTRIAL & MARINE ENGINES Belt Tightener (3N9582)
3406 INDUSTRIAL & MARINE ENGINES V-Belt Tension Chart
3406 INDUSTRIAL & MARINE ENGINES Gauges For Engine Oil Pressure
3406 INDUSTRIAL & MARINE ENGINES Sending Units For Oil Pressure 5L7450 Sending Unit 12V, 24V or 32V systems
3406 INDUSTRIAL & MARINE ENGINES Gauges For Water Temperature
3406 INDUSTRIAL & MARINE ENGINES Sending Units For Water Temperature
3406 INDUSTRIAL & MARINE ENGINES Ammeter 3N5992 Gauge (Stewart-Warner Number 690-C)
3406 INDUSTRIAL & MARINE ENGINES Fuel Pressure Gauges
3406 INDUSTRIAL & MARINE ENGINES Gauges For Gear Oil Pressure
3406 INDUSTRIAL & MARINE ENGINES Sending Unit For Gear Oil Pressure 5L7449 Sending Unit 12V, 24V or 32V system
3406 INDUSTRIAL & MARINE ENGINES Tachometers
3406 INDUSTRIAL & MARINE ENGINES Auxiliary Drive Groups
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.