Usage:
1. Remove mounting bolts (1) from the selector valve.
2. Remove selector valve (2).
Install Selector Valve
1. Install selector valve.
2. Install mounting bolts and tighten to 17 to 25 lb. ft. (23 to 35 N·m).
Disassemble Selector Valve
start by:
a) remove selector valve.
1. Remove orifice plate cover bolts (1).
2. Remove orifice plate cover (2), gasket (3), orifice plate (4), gasket (5), pressure rate control piston (6), pressure regulating springs (7), pressure regulating piston (8), piston ball check (9), and ball check spring (10).
3. Remove pipe plug (11), detent spring (12), detent (13), valve cover bolts (14), and valve and cover (15).
Assemble Selector Valve
1. Install valve and cover (1), valve cover bolts (2), detent (3), detent spring (4), and pipe plug (5).
2. Install pressure regulating piston (6), pressure regulating springs (7), pressure rate control piston (8), gasket (9), ball check spring (10), ball check (11), orifice plate cover (12), and cover bolts (13).
end by:
a) install selector valve.