Pulley And Damper
Usage:
Install the damper assembly on the crankshaft until the hub of the damper assembly comes in contact with the gear on the crankshaft. DO NOT use the bolt and washer that holds the damper assembly on the crankshaft to install the damper assembly.
(1) Torque for bolt holding the pulley ... 460 ± 60 lb. ft.(624 ± 80 N·m)
(2) Distance from end of damper assembly to edge of dust shield ... 1.25 ± .06 in.(32.3 ± 1.5 mm)
Caterpillar Information System:
3208 TRUCK ENGINE Crankshaft
3208 TRUCK ENGINE Piston
3208 TRUCK ENGINE Connecting Rod
3208 TRUCK ENGINE Cylinder Block
3208 TRUCK ENGINE V-Belt Tension Chart
3208 TRUCK ENGINE Water Temperature Regulator (9L6756)
3208 TRUCK ENGINE Water Pump
3208 TRUCK ENGINE Oil Pump
3208 TRUCK ENGINE Oil Level Gauge
3208 TRUCK ENGINE Lubrication System
3208 TRUCK ENGINE Manifold And Ventilation Valve
3208 TRUCK ENGINE Air Inlet Manifold
3208 TRUCK ENGINE Fan Drive
3208 TRUCK ENGINE Flywheel
3208 TRUCK ENGINE Mounting Group For Allison Transmission
3208 TRUCK ENGINE Flywheel Runout
3208 TRUCK ENGINE Flywheel Housing Runout
3208 TRUCK ENGINE Flywheel Housing Bore
3208 TRUCK ENGINE Alternators
3208 TRUCK ENGINE Starting Motors
3208 TRUCK ENGINE Starter Solenoids
3208 TRUCK ENGINE Shutoff Solenoid (Activated to Run)
3208 TRUCK ENGINE Air Compressor
3208 TRUCK ENGINE Systems Operation