1693 DIESEL TRUCK ENGINE Caterpillar


Water Temperature Regulators

Usage:

Remove Water Temperature Regulators

1. Drain the engine cooling system.

2. Disconnect vent line (1).

3. Disconnect bypass line (3) from the regulator housing.

4. Remove the bolts that hold the regulator housing. Remove the water temperature regulator housing (2).

5. Remove the water temperature regulators (5) and seals (4) from the housing.

Install Water Temperature Regulators

1. Use tooling (A) to install the seals in the regulator housing.

NOTE: The lips of the seals must be up.

2. Install the water temperature regulators (1) in housing (2). Install the housing (2).

3. Connect the water temperature regulators bypass line.

4. Connect the vent tube.

5. Fill the cooling system to the correct level. See LUBRICATION AND MAINTENANCE GUIDE.

Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.