3306 DIESEL TRUCK ENGINE Caterpillar


Fuel Ratio Control

Usage:

Remove Fuel Ratio Control

1. Remove two bolts (1) from the fuel ratio control

2. Remove the fuel ratio control from the adapter housing.

Install Fuel Ratio Control

1. Put the fuel ratio control in position on the adapter housing with bolt (2) engaged in arm (3) as shown.

2. Make adjustment to the fuel ratio control. See TESTING AND ADJUSTING.

Disassemble Fuel Ratio Control

start by:

a) remove the fuel ratio control

1. Remove the bolts and remove cover (8).

2. Remove cover (5), spring (4), washer (7) and diaphragm (3) from the housing.

3. Remove pin (6) from bolt (1).

4. Remove the bolt from retainer (2) and the housing.

Assemble Fuel Ratio Control

1. Install the bolt in the housing and retainer.

2. Install the pin in the bolt.

3. Install the diaphragm, washer and spring. Install cover (1) on the housing.

4. Install top cover (2).

end by:

a) install fuel ratio control

Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.