3306 DIESEL TRUCK ENGINE Caterpillar


Torque Stop

Usage:

Remove And Install Torque Stop

NOTE: The fuel injection pump housing and governor does not have to be removed to remove or install the torque stop.

1. Remove torque stop housing (1).

2. Remove torque control (2). Disassemble the torque control by removing two insulators (3), bar (4), contact (5) and shim (6).

3. Remove load pin (7).

4. Install the load pin.

5. Assemble the torque control by installing the two insulators, the contact and the shim to the bar.

6. Install the torque control.

7. Install the torque stop housing.

end by:

a) make adjustment of the fuel system setting (See Fuel System Setting in Testing and Adjusting)

Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.