Electric Starting Motor
Usage:
Remove Electric Starting Motor
1. Disconnect the wires from the starting motor. Put identification on the wires as to their location on motor.
2. Disconnect the governor linkage.
3. Fasten a hoist to the starter. Remove three bolts (1) that hold the starting motor to the flywheel housing. Remove the electric starting motor. Weight is 70 lb. (32 kg).
Install Electric Starting Motor
1. Put the electric starting motor in position. Install the three bolts.
2. Connect the wires to the starting motor.
3. Connect the governor linkage.
Caterpillar Information System:
3306 DIESEL TRUCK ENGINE Alternator
3306 DIESEL TRUCK ENGINE General Instructions
3306 DIESEL TRUCK ENGINE Engine Vibration Troubleshooting
3306 DIESEL TRUCK ENGINE Fuel In Crankcase Oil
3306 DIESEL TRUCK ENGINE Loss Of Coolant
3306 DIESEL TRUCK ENGINE Cooling System
3306 DIESEL TRUCK ENGINE Difficult Starting - Engine Crankshaft Will Not Turn; Engine Crankshaft Turns Too Slowly
3306 DIESEL TRUCK ENGINE Difficult Starting - Engine Crankshaft Turns Freely
3306 DIESEL TRUCK ENGINE Too Much Exhaust Smoke - White Smoke; Blue Smoke
3306 DIESEL TRUCK ENGINE Too Much Exhaust Smoke - Black or Gray
3306 DIESEL TRUCK ENGINE Misfiring And Running Rough
3306 DIESEL TRUCK ENGINE Problem With Vehicle Or Vehicle Operation
3306 DIESEL TRUCK ENGINE Torque Stop
3306 DIESEL TRUCK ENGINE Fuel Injection Lines
3306 DIESEL TRUCK ENGINE Fuel Priming Pump
3306 DIESEL TRUCK ENGINE Tachometer Drive
3306 DIESEL TRUCK ENGINE Fuel Filter
3306 DIESEL TRUCK ENGINE Fuel Injection Pump Housing And Governor
3306 DIESEL TRUCK ENGINE Fuel Ratio Control
3306 DIESEL TRUCK ENGINE Fuel Shutoff Solenoid
3306 DIESEL TRUCK ENGINE Fuel Check Valve And Bypass Valve
3306 DIESEL TRUCK ENGINE Adapter Housing And Levers
3306 DIESEL TRUCK ENGINE Fuel Injection Pump Housing And Governor
3306 DIESEL TRUCK ENGINE Governor