Governor Control Linkage
Usage:
(1) Governor control shaft.
(2) Torque for nut ... 12 ± 4 N·m (9 ± 3 lb.ft.)
(3) Install levers (3) as shown with shaft (1) in full shut-off position.
(4) Mark on governor control shaft (1).
(5) With shaft (1) in low idle position clearance between No. 8 fuel line (6) and head of bolt (7) should be 0.25 mm (.010 in.) minimum.
(6) No. 8 fuel line.
(7) Bolt.
Caterpillar Information System:
3408 & 3408B DIESEL TRUCK ENGINE Ether Starting Aid
3408 & 3408B DIESEL TRUCK ENGINE Fuel Filter Base
3408 & 3408B DIESEL TRUCK ENGINE Primary Fuel Filter
3408 & 3408B DIESEL TRUCK ENGINE Tachometer Drive
3408 & 3408B DIESEL TRUCK ENGINE Fuel Transfer Pump Drive
3408 & 3408B DIESEL TRUCK ENGINE Fuel Transfer Pump
3408 & 3408B DIESEL TRUCK ENGINE Governor Drive And Oil Pump
3408 & 3408B DIESEL TRUCK ENGINE Fuel Injection Pump Housing
3408 & 3408B DIESEL TRUCK ENGINE Governor
3408 & 3408B DIESEL TRUCK ENGINE Shutoff Solenoids
3408 & 3408B DIESEL TRUCK ENGINE Fuel Injection Lines
3408 & 3408B DIESEL TRUCK ENGINE Fuel Injection Nozzles And Adapters
3408 & 3408B DIESEL TRUCK ENGINE Fuel Ratio Control
3408 & 3408B DIESEL TRUCK ENGINE Automatic Timing Advance Unit (4N677, 6N3195 And 9N3959)
3408 & 3408B DIESEL TRUCK ENGINE Valve Covers
3408 & 3408B DIESEL TRUCK ENGINE Valve Rocker Arms, Lifters And Bridges
3408 & 3408B DIESEL TRUCK ENGINE Valves, Valve Springs And Valve Seat Inserts
3408 & 3408B DIESEL TRUCK ENGINE Timing Gear Housing And Covers
3408 & 3408B DIESEL TRUCK ENGINE Front Timing Gears
3408 & 3408B DIESEL TRUCK ENGINE Drive Gear For The Rear Balancer
3408 & 3408B DIESEL TRUCK ENGINE Rear Balancer
3408 & 3408B DIESEL TRUCK ENGINE Air Compressor Drive Group
3408 & 3408B DIESEL TRUCK ENGINE Camshaft
3408 & 3408B DIESEL TRUCK ENGINE Cylinder Heads